LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

CV spline count
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=44694		 Page 1 of 1
Author:  durangotang [ Thu Jul 02, 2009 1:09 am ]
Post subject:  CV spline count
Anyone know what it is?
Author:  JL Rockies [ Thu Jul 02, 2009 1:44 am ]
Post subject: 
Are there options?
Author:  durangotang [ Thu Jul 02, 2009 1:52 am ]
Post subject: 
I think there's just one spline count... but I could be wrong
Author:  JL Rockies [ Thu Jul 02, 2009 1:59 am ]
Post subject: 
I'm going to NAPA tomorrow to order new axles, I hope there will be no confusion.
Author:  durangotang [ Thu Jul 02, 2009 2:02 am ]
Post subject: 
Don't worry... I'm asking for an entirely different reason :D
Author:  tjkj2002 [ Thu Jul 02, 2009 9:55 am ]
Post subject: 
27 splines for the diff side.
Author:  Drassis [ Thu Jul 02, 2009 10:18 am ]
Post subject: 
JL Rockies wrote:
I'm going to NAPA tomorrow to order new axles, I hope there will be no confusion.


NO confusion NAOA carries two types the rebuilt for 66$ or brand new for 88$ I just bought the new ones...As the rebuilt ones required a 110$ core charge lol
Author:  durangotang [ Thu Jul 02, 2009 10:20 am ]
Post subject: 
tjkj2002 wrote:
27 splines for the diff side.


is it different on the hub side?
Author:  tjkj2002 [ Thu Jul 02, 2009 10:32 am ]
Post subject: 
Drassis wrote:
JL Rockies wrote:
I'm going to NAPA tomorrow to order new axles, I hope there will be no confusion.


NO confusion NAOA carries two types the rebuilt for 66$ or brand new for 88$ I just bought the new ones...As the rebuilt ones required a 110$ core charge lol
Get the remaned ones,they are the correct CV shafts,those "new" ones are 90% of the time the incorrect length and strength of the OEM ones(even remaned ones) and of course the remaned ones have a core charge due to how do you think they make remaned parts?

Quote:
is it different on the hub side?
Don't know,never counted the splines.
Author:  sidewayskj [ Thu Jul 02, 2009 3:46 pm ]
Post subject: 
If you live in a small town and know the napa guys it all pays off didn't have to pay the core charge for my re and re cv shaft but going to the city to get groceries because you town wants nine bucks for a box of cearl is another down fall lol. Good luck on the half shaft replacement.
Author:  JL Rockies [ Thu Jul 02, 2009 4:31 pm ]
Post subject: 
tjkj2002 wrote:
Drassis wrote:
JL Rockies wrote:
I'm going to NAPA tomorrow to order new axles, I hope there will be no confusion.


NO confusion NAOA carries two types the rebuilt for 66$ or brand new for 88$ I just bought the new ones...As the rebuilt ones required a 110$ core charge lol
Get the remaned ones,they are the correct CV shafts,those "new" ones are 90% of the time the incorrect length and strength of the OEM ones(even remaned ones) and of course the remaned ones have a core charge due to how do you think they make remaned parts?

Quote:
is it different on the hub side?
Don't know,never counted the splines.


Not having read this, I ordered the reman axles. Seemed to be the right thing to do.
Author:  durangotang [ Fri Jul 03, 2009 1:03 pm ]
Post subject: 
tjkj2002 wrote:
Don't know,never counted the splines.


WHAAAAAAAT?!?! :lol: :lol:
Author:  JL Rockies [ Fri Jul 03, 2009 2:22 pm ]
Post subject: 
I'll count them when I go out to that garage today. I still have to unpack the KJ from our MOAB trip.
Author:  durangotang [ Fri Jul 03, 2009 3:00 pm ]
Post subject: 
Any chance that I can have your old ones? :D

Seriously.
Author:  JL Rockies [ Fri Jul 03, 2009 3:10 pm ]
Post subject: 
Sure but the only problem is the $125 core charge on each one!
Author:  durangotang [ Fri Jul 03, 2009 3:12 pm ]
Post subject: 
Forgot about that... never mind :lol:
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/