Prospect62 wrote:
Murphyman wrote:
So do I just roll up into a Home Depot and get three M12 X 1.75 X40 bolts?
Yeah get grade 8 hardware...check hardware stores you should be able to find it. Like was recommended in that link, if your threads have been corroded, get a tap and die set and chase the threads. Otheriwse you'll never get the bolts in there.
So three of the M12 X 1.75 X40 bolts, and make sure they are 'Grade 8'. Doesn't sound too bad. There's 4 holes on the hardware, is the big one just there for kicks?
I plan on doing practically EVERYTHING to my Jeep in a few weeks, most likely all on the same day, or almost all of it on the same day. That includes lift, tires/wheels, tow hooks, and skids. As of now I'm clueless about most of this stuff, so I appologize for the dumb questions.
_________________
2005 Patriot Blue Sport 3.7L 4WDAlpine Headunit/2 12" Kenwood Subs/620 Watt Power Acoustik Amp
Teenage Driving/K&N Drop-In/MOPAR Tow Hooks & Skids/Debadged
BDS Coils/BDS 5500 Shocks/15x8 Cragar Soft 8's/31x10.5xR15 MTR
Teraflex Bumpstops/Rear Bumpstops/Trimmed Bumper
http://murphyman1.mybrute.com/