Try this 'How-to' thread on doing the brakes, it should provide the answers you seek
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| What size is that nut! http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=44774 |
Page 1 of 1 |
| Author: | qbracken [ Sun Jul 05, 2009 11:50 pm ] |
| Post subject: | What size is that nut! |
Specifically, the large lug nuts that seems to secure the front brake disks? I hafta replace the wheel speed sensors in the front, and i have all the tools I need except the right sized lug ratchet to get those big lugs off so i can remove the brakes... Anyone what size those lugs are? |
|
| Author: | corwyyn [ Sun Jul 05, 2009 11:57 pm ] |
| Post subject: | |
Try this 'How-to' thread on doing the brakes, it should provide the answers you seek
|
|
| Author: | qbracken [ Mon Jul 06, 2009 12:11 am ] |
| Post subject: | |
Thanks! >>(the Center Nut does not hold the rotor on) (see figure 4) << Welp, I think that pretty much answers my question! 
|
|
| Author: | KoRnyBrad [ Mon Jul 06, 2009 3:57 am ] |
| Post subject: | |
No it is the 7 years of rust that held mine on.  Amazingly after all the sledge hammer hits it was still turnable! 
|
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|