LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

SUSPENSION TORQUE SPECS FOR '06 KJ
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=45554		 Page 1 of 1
Author:  jhblackwell [ Mon Aug 03, 2009 3:05 pm ]
Post subject:  SUSPENSION TORQUE SPECS FOR '06 KJ
SUSPENSION TORQUE SPECIFICATIONS FOR 2006 JEEP LIBERTY KJ.
(The following information is out of the official Daimler-Chrysler Corp. Jeep service manual, volume 1)

WARNING:
Suspension components with rubber bushings must be tightened with the vehicle at normal ride height. It is important to have the springs supporting the weight of the vehicle when the fasteners are torqued. If springs are not at their normal ride position, vehicle ride comfort will be affected and cause premature bushing wear.

FRONT TORQUE SPECIFICATIONS

DESCRIPTION---------------------------Ft. Lbs.

Front shock absorber clevis bracket upper nut---45
Front shock absorber clevis bracket lower nut---110
Front shock absorber top (4) mounting nuts---80
Front shock to spring and isolator nut---30
Upper suspension arm front nut---90
Upper suspension arm rear nut---90
Lower suspension arm front nut---125
Lower suspension arm rear nut---125
Stabilizer bar clamp nut---110
Stabilizer bar link upper nut---100
Stabilizer bar link lower nut---85
Hub/bearing bolt---96
Hub/bearing halfshaft nut---100
Upper ball joint nut---60
Lower ball joint nut---60
wheel speed sensor---10

REAR TORQUE SPECIFICATIONS

DESCRIPTIOIN----------------------------------Ft. Lbs.

Shock absorber upper nut---80
Shock absorber lower nut---85
Suspension arm upper ball joint nut---70
Suspension arm upper frame bolts---74
Control arm frame bolts---74
Rear upper ball joint bracket---100
Suspension arms lower body/axle bracket nut---120
Control arms to control arm bracket---75
Suspension arms lower frame bracket nut---120
Control arm bracket to rear differential---100
Rear differential damper to rear differential---45
Stabilizer bar bolts---73
Author:  bshooter [ Wed Apr 03, 2013 4:01 pm ]
Post subject:  Re: SUSPENSION TORQUE SPECS FOR '06 KJ
This post has died :grim: I would like to thank jhblackwell for posting this!! I use it all the time, Thanks bshooter
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/