Here is flander's pic
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| mounting instructions for daystar top plate http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=4577 |
Page 1 of 1 |
| Author: | flanders [ Sun Jan 01, 2006 3:36 pm ] |
| Post subject: | mounting instructions for daystar top plate |
can anyone tell me how the daystar top plate is mounted to the original rubber bushing -see picture- or does the original bushing becomes obsolete? can anyone post me a picture? i dont know how to put a picture in this post [/img] |
|
| Author: | Wilmo [ Sun Jan 01, 2006 8:49 pm ] |
| Post subject: | |
yeah email me the pic and I'll post it for you |
|
| Author: | boxhead [ Sun Jan 01, 2006 9:47 pm ] |
| Post subject: | |
If you mean the big top rubber isolator, it mounts pretty much the same as it does to the OEM top plate. The bottom isolator goes away as the bottom puck also acts as an isolator. |
|
| Author: | Wilmo [ Mon Jan 02, 2006 8:13 pm ] |
| Post subject: | |
Here is flander's pic
|
|
| Author: | lilmatty [ Mon Jan 02, 2006 9:23 pm ] |
| Post subject: | Re: mounting instructions for daystar top plate |
flanders wrote: can anyone tell me how the daystar top plate is mounted to the original rubber bushing -see picture-
or does the original bushing becomes obsolete? can anyone post me a picture? i dont know how to put a picture in this post [/img] Same as with the factory plate. |
|
| Author: | flanders [ Tue Jan 03, 2006 3:54 pm ] |
| Post subject: | |
as you can see in the pic, the original plate has a rubber bushing vulcanised into it the daystar plate came without a bushing, so the hole in it is too big to attach the rod of the strut. can someone post a picture of a mounted daystar plate? does the daystar plate replace the original, or do you have to mount then together? |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|