Wow, Glad we could help
I drilled out the nutzerts on the cross member and used carriage bolts.
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Need some guidence http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=47118 |
Page 1 of 1 |
| Author: | yodejt02 [ Mon Oct 12, 2009 3:56 pm ] |
| Post subject: | Need some guidence |
I have searched but could not find anything on using OEM skid plates from an 02 on an 06. I know i will have to drill a new whole for the engine skid but the t-case skid is not lining up right. |
|
| Author: | yodejt02 [ Mon Oct 12, 2009 4:09 pm ] |
| Post subject: | |
Ok just called the stealership to see if the mounting hardware for the skids were available, and they said no. The hardware for the t-case and trany skid were non servicable. So how do you mount these with out those special bolts per the instructions on from the tech page. Tell me where I can find them or a way around it. I got a great deal on these skids, trying to keep this at a budget! |
|
| Author: | yodejt02 [ Mon Oct 12, 2009 4:57 pm ] |
| Post subject: | |
after much searching found what i needed. |
|
| Author: | bugnout [ Mon Oct 12, 2009 5:58 pm ] |
| Post subject: | |
Wow, Glad we could help
I drilled out the nutzerts on the cross member and used carriage bolts. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|