I currently have Rancho rear shocks

OME MD front coils

OME rear coils ( they only give me 1 1/2 inches of lift at the moment)

a daystar top plate

i have on order rancho front struts

what else do i need to complete a frankenlift?

is there 3/4" rear spacers available ( so i can level it out )

i w

_________________
http://www.cardomain.com/memberpage/742957
aussie KJ Lost No#150605
3" OME lift + Rancho RS9000xl's front and rear
prototype Airflow snorkel
Magnaflow cat back
265/70R16 Hankook MTRT03 on MOABS baby
4.10's and a truetrac up front
super skinks
coming soon
a myride wireless controller

you need the Daystar strut top plates and the Daystar 1.5inch spacers to make up a Frankenlift for the front I believe.

PM me for info on where to get them for cheap freight to Australia.

OME 948 rear coils are used with the Frankenlift at the moment

I've seen guys post on the forum that the front of the frankenlift works out higher than the rears by 5-10mm with the 948's in place.

_________________
2005 KJ CRD Cherokee (Liberty) Extreme Sport, ARB bar and IPF lights, Rocky Road Combo lift (Daystar 1.5inch spacer with RR strut top plate and factory springs) with OME struts (front), OME 947 with Rancho RSX17004 shocks (rear), all Mopar skid plates, Tow Hitch, BFG 245/70/16 AT's Pics.

I always wondered why they used the ome rear coils, i also only got 1.5in lift with them in place. But ive got the ome lift, not franken lift.

_________________
LOST KJ'S
Where are you going???
Current Jeep: 2004 Jeep Liberty
-Atlantic Blue
-Air Ride Rear Suspension ; OME/Rustys Lift ; Powertrax Locker ; Moog Lower Ball-Joints ; 245/70/16 Yokohama Geolander A/T-S's on MOABS ; Flowmaster 50 SUV
Lost #007082
http://www.cardomain.com/id/jeepjeepster