| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| tire wereing funny http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=49597 |
Page 1 of 1 |
| Author: | kingjeep [ Mon Jan 25, 2010 8:04 am ] |
| Post subject: | tire wereing funny |
ok i just rotated my new treadrights for the fist time and the frunt tires were very uneven i have only put 4000 mils on them and i alined the jeep when i put them on right after i did the lift all the info about my lift and tires are in my signiter i have been told sfeveral things this is becouse the ruber is not the same on a retread the 12ply tire is to heavy for a liberty this tread pattern needs to be rotated every 2000 mils i have been off road a cuple of times since i put them on and had a minor fenderbender not sure how much this is a factor any ideas |
|
| Author: | tommudd [ Mon Jan 25, 2010 9:40 am ] |
| Post subject: | Re: tire wereing funny |
Did you align it once or twice after the lift? Many times its a good idea to get a alignment right away of course then within a few thousand miles after the lift settles in. Also the fender bender did it hit the tire anyway? Or hit the frame? |
|
| Author: | JL Rockies [ Mon Jan 25, 2010 10:42 am ] |
| Post subject: | Re: tire wereing funny |
My guess is it was never aligned after the lift. If you did get it aligned, I bet it wasn't done correctly since FL is a bit of a talent vacuum. Is the fender bender you refer to the one that took out the radiator and you were concerned about the ins totaling it? |
|
| Author: | kingjeep [ Mon Jan 25, 2010 7:21 pm ] |
| Post subject: | Re: tire wereing funny |
JL Rockies wrote: My guess is it was never aligned after the lift. If you did get it aligned, I bet it wasn't done correctly since FL is a bit of a talent vacuum. Is the fender bender you refer to the one that took out the radiator and you were concerned about the ins totaling it? yes that would be the one and i was not that conserned but it did not start that was the issue no frame damage on that wreck also the aliment was dun on a brand new machin when i first had the lift done at glends auto josph they are not a cut rate shope its a buddy of tranny doc i had it alined when the lift was just put on and this time which is only 4000 mils after |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|