It is currently Fri Apr 24, 2026 9:46 am

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 4 posts ] 
Author Message
 Post subject: tire wereing funny
PostPosted: Mon Jan 25, 2010 8:04 am 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Sun Jul 13, 2008 9:39 pm
Posts: 329
Location: Fort Lauderdale, FL
ok i just rotated my new treadrights for the fist time and the frunt tires were very uneven i have only put 4000 mils on them and i alined the jeep when i put them on right after i did the lift all the info about my lift and tires are in my signiter i have been told sfeveral things

this is becouse the ruber is not the same on a retread
the 12ply tire is to heavy for a liberty
this tread pattern needs to be rotated every 2000 mils

i have been off road a cuple of times since i put them on and had a minor fenderbender not sure how much this is a factor

any ideas

_________________
An Evil genius bent on destroying grammatical standards
My Wife is a Reading teacher; if she can overlook my spelling, so can you.
KJ Stands for KING JEEP
2002 Jeep Liberty KJ 245/75R16 BFG Tread Write MTGs OME / rancho lift
1999 Dodge Durango SXT 4X4V8
2012 Dodge Journey SXT 3.6 V6
South Florida Jeep Club (SFJC) Member


Top
 Profile  
 
 Post subject: Re: tire wereing funny
PostPosted: Mon Jan 25, 2010 9:40 am 
Offline
Moderator / Lifetime Member
Moderator / Lifetime Member

Joined: Thu Jul 07, 2005 5:49 pm
Posts: 27226
Location: NOW Southeastern Ohio/ Tanzania
Did you align it once or twice after the lift? Many times its a good idea to get a alignment right away of course then within a few thousand miles after the lift settles in.
Also the fender bender did it hit the tire anyway? Or hit the frame?

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited


Top
 Profile  
 
 Post subject: Re: tire wereing funny
PostPosted: Mon Jan 25, 2010 10:42 am 
Offline
LOST Addict
User avatar

Joined: Mon Jan 29, 2007 12:54 am
Posts: 3865
Location: Draper, UT
My guess is it was never aligned after the lift. If you did get it aligned, I bet it wasn't done correctly since FL is a bit of a talent vacuum. Is the fender bender you refer to the one that took out the radiator and you were concerned about the ins totaling it?

_________________
2006 CRD http://www.UtahPowderCoatings.com/ http://www.gorecon.com/ I'm kind of a big deal.
RL rear bumper, ARB front bumper, Mile Marker winch, Power Tank, Skids by Mopar & Skid Row, RL Super Skink Sliders, 235/85R16 MTR, Air Flow Snorkel, DTT, 4.10 gears, Frankenlift II, Katskin leather, JL Audio stereo, Rosen video.


Top
 Profile  
 
 Post subject: Re: tire wereing funny
PostPosted: Mon Jan 25, 2010 7:21 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Sun Jul 13, 2008 9:39 pm
Posts: 329
Location: Fort Lauderdale, FL
JL Rockies wrote:
My guess is it was never aligned after the lift. If you did get it aligned, I bet it wasn't done correctly since FL is a bit of a talent vacuum. Is the fender bender you refer to the one that took out the radiator and you were concerned about the ins totaling it?

yes that would be the one and i was not that conserned but it did not start that was the issue

no frame damage on that wreck

also the aliment was dun on a brand new machin when i first had the lift done at glends auto josph they are not a cut rate shope its a buddy of tranny doc

i had it alined when the lift was just put on and this time which is only 4000 mils after

_________________
An Evil genius bent on destroying grammatical standards
My Wife is a Reading teacher; if she can overlook my spelling, so can you.
KJ Stands for KING JEEP
2002 Jeep Liberty KJ 245/75R16 BFG Tread Write MTGs OME / rancho lift
1999 Dodge Durango SXT 4X4V8
2012 Dodge Journey SXT 3.6 V6
South Florida Jeep Club (SFJC) Member


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 43 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com