No Listing on Jparts.com website under that part no. Ihave emailed but no response to date..........
Any other ideas would be appreciated. 
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Looking for Grab Bar Kit Supplier http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=49625 |
Page 1 of 1 |
| Author: | Team J.a.G [ Tue Jan 26, 2010 2:37 am ] |
| Post subject: | Looking for Grab Bar Kit Supplier |
I'm trying to locate a supplier for the following part:- "Slate Grab Bar Kit to fit above passenger Glove compartment - Part No: #OZE751DVAA." If anyone has any information I would greatly appreciate it. |
|
| Author: | ATXKJ [ Tue Jan 26, 2010 9:21 am ] |
| Post subject: | Re: Looking for Grab Bar Kit Supplier |
Google can't find it - they have all knowledge so I'm wondering if you have a typo? They did find lots of Slate grab bars - but they bolt onto walls - nothing that would fit a Jeep |
|
| Author: | Team J.a.G [ Tue Jan 26, 2010 7:18 pm ] |
| Post subject: | Re: Looking for Grab Bar Kit Supplier |
This is where I found it . The Part number was listed on the JEEP Projects site viewtopic.php?f=93&t=48224 http://www.jeepprojects.com/content.php?article.45 You're probably right about the part number being a possible typo....It obviously exists, but where?? |
|
| Author: | ATXKJ [ Wed Jan 27, 2010 12:03 am ] |
| Post subject: | Re: Looking for Grab Bar Kit Supplier |
I'm still not finding anything I'm going to guess - the jeep project was uploaded Sunday 19 December 2004 the note says 'parts that are included in the OEM Grab Bar Kit assembly.' my guess is that since the 02-03 didn't have the grab bar - that Jeep made a kit after they introduced the 04's to retrofit the earlier ones and that they're out of production now - That doesn't mean they don't exist - just that they aren't easy to find I'd watch Ebay - and check dealerships that had accessories in 04/05 - |
|
| Author: | FreedomKJ [ Wed Jan 27, 2010 12:38 am ] |
| Post subject: | Re: Looking for Grab Bar Kit Supplier |
Call up the guys at jparts.com. I haven't dealt with them in years, but I remember back in the early days of the KJ they were great at coming up with hard to find parts. |
|
| Author: | Team J.a.G [ Wed Jan 27, 2010 1:26 am ] |
| Post subject: | Re: Looking for Grab Bar Kit Supplier |
Thanks for your thoughts & efforts guys. I've already tried one Australian dealership who is known for a good range of accessories, Morris 4x4 USA with no luck. I'll try emailing Jparts and see what response I get, if any... |
|
| Author: | Team J.a.G [ Wed Jan 27, 2010 7:39 pm ] |
| Post subject: | Re: Looking for Grab Bar Kit Supplier |
No Listing on Jparts.com website under that part no. Ihave emailed but no response to date.......... Any other ideas would be appreciated.
|
|
| Author: | trainer [ Sun Jan 31, 2010 1:22 pm ] |
| Post subject: | Re: Looking for Grab Bar Kit Supplier |
I was looking for the same part and it can be ordered from Mopar, the price in Belgium is about 124 euro plus vat so total of about 150 euro. There is a typo in the part no, the first character is a zero instead of an capital o. |
|
| Author: | Team J.a.G [ Sun Jan 31, 2010 7:54 pm ] |
| Post subject: | Re: Looking for Grab Bar Kit Supplier |
trainer wrote: I was looking for the same part and it can be ordered from Mopar, the price in Belgium is about 124 euro plus vat so total of about 150 euro. There is a typo in the part no, the first character is a zero instead of an capital o. Thanks trainer for the info. I have since tried the Mopar US link with the up-dated typo correction and still come up with "0" found answer. Frrustrating  I must say 
|
|
| Author: | ATXKJ [ Sun Jan 31, 2010 8:23 pm ] |
| Post subject: | Re: Looking for Grab Bar Kit Supplier |
Google was a little happier with the 0 instead of O. however what it found was Scribd copy of the 04 Parts Manual so it is OEM http://www.scribd.com/doc/2640567/Jeep-KJ-2004-Liberty-Cherokee-MOPAR-Parts-Catalog (note that's a 10 meg plus file - my computer did not like it) this is a cleaner copy (still 10+Meg) http://colorado4wheel.com/manuals/Jeep/KJ/ |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|