It is currently Fri Apr 26, 2024 3:32 am

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 4 posts ] 
Author Message
 Post subject: Transfer case slipping
PostPosted: Sat Jul 16, 2005 9:16 pm 
Offline
LOST Newbie

Joined: Tue Jul 12, 2005 8:53 pm
Posts: 7
Location: Dyke, VA
I know there was discussion about this in the past but I could not find anything here on the new site.

Libby is slipping out of 4x4. I think I read that the chains were stretching. Can any give my some info on this?

Thanks.

_________________
Duct tape is like the force, it has a DARK side, a light side and holds the universe together.
___________________________________________
Lost # 00005
'02 KJ (Liberty1 lets me drive if I am good.
'01 TJ My toy
'46 CJ2A, '49PW, '56 L226, '67 CJ6E, '89 Wag


Top
 Profile  
 
 Post subject: Hope this helps
PostPosted: Sun Jul 17, 2005 1:09 am 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Mon Jul 04, 2005 6:04 pm
Posts: 871
Location: Prescott AZ
This could just be a very simple shift adjustment. Very easy to do and if the adjustment is off just a little bit it will jump out of four wheel dive. later...Clint

_________________
http://lostkjwest.com
http://www.azlostkj.com
http://lostzj.com
KE7JLP


Top
 Profile  
 
 Post subject: assistance
PostPosted: Sun Jul 17, 2005 1:39 am 
Offline
LOST Newbie

Joined: Tue Jul 12, 2005 8:53 pm
Posts: 7
Location: Dyke, VA
Thanks,

I will check into that in the morning.

_________________
Duct tape is like the force, it has a DARK side, a light side and holds the universe together.
___________________________________________
Lost # 00005
'02 KJ (Liberty1 lets me drive if I am good.
'01 TJ My toy
'46 CJ2A, '49PW, '56 L226, '67 CJ6E, '89 Wag


Top
 Profile  
 
 Post subject: Hope this helps
PostPosted: Sun Jul 17, 2005 1:45 am 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Mon Jul 04, 2005 6:04 pm
Posts: 871
Location: Prescott AZ
If nothing else...remove the shifter linkage and shift the t-Case to the rasnge that was causing the problem with out the shifter hooked up. See if it jumps out of gear. If it does not then you know it is just a simple shifter linkage adjustment needed. I just had to do the same thing on my daughters stupid XJ....it was jumping out of low range under a load. Adjusted the shifter linkage and all is well now. Later...Clint

_________________
http://lostkjwest.com
http://www.azlostkj.com
http://lostzj.com
KE7JLP


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 66 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com