| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Moog k3199 ball joints http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=5085 |
Page 1 of 1 |
| Author: | chemguy [ Sat Jan 21, 2006 12:05 am ] |
| Post subject: | Moog k3199 ball joints |
Got these in today. One was the correct grease zerk version, the other was the OEM crap. I even called the order in vs. ordering over the web to make sure they did not send me the wrong ones. Crap! Anyway, the zerked ball joint is much more HD than the OEM version. Can't wait to get these on as my old ones have me running a little vervous. |
|
| Author: | jpzkj [ Sat Jan 21, 2006 1:14 am ] |
| Post subject: | |
where did you get them from ? |
|
| Author: | Bonehead [ Sat Jan 21, 2006 9:15 am ] |
| Post subject: | |
I know NAPA sells Moog stuff...... |
|
| Author: | fermill403 [ Sat Jan 21, 2006 11:00 am ] |
| Post subject: | |
How about the part #, so when ordered we dont get the "crap". |
|
| Author: | USAFCOP [ Sat Jan 21, 2006 5:10 pm ] |
| Post subject: | |
If you order the moog joints, even the non serviceable are better than the TRW factory ones. The deal is that I believe the serviceable are a new version of the same part number. It took Al quite a few trys toget me 2 serviceable units. It is real similar to how ARB changed the locker for the 8.25 and said it would work in the lib. They failed to tell everyone that when buying for a lib you needed to look for a certain serial number instead of just the part number since the old version of the same part number was still out on the shelves. |
|
| Author: | Troysterr [ Sat Jan 21, 2006 7:02 pm ] |
| Post subject: | |
I ordered a pair from Amazon.com, and both were the greasable kind. Now I just have to figure out how to install them... |
|
| Author: | fdezone [ Sun Jan 22, 2006 12:38 pm ] |
| Post subject: | |
Same thing happened to me. I ordered mine from RockAuto.com. Had to ship back the one without the zerk fitting and provide them with a tracking number before they would send me the correct one. The model numbers on the boxes were the same though, strange. |
|
| Author: | chemguy [ Mon Jan 23, 2006 3:32 pm ] |
| Post subject: | |
I returned the wrong ball joint to Rock Auto today, and when I was giving their rep the UPS tracking number I asked him to have his warehouseman put hands on the part to make sure it was correct. Basically, open the box to confirm before you ship it. Don’t think he liked my request, but it sounds like he will comply. Time will tell. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|