Warn reciever shackle bracket

nosnorb_808 · **Posted:** Fri Apr 23, 2010 8:46 pm

I ordered & just recieved my warn shackle bracket from JBA. My question is, is there supposed to be a bolt to bolt it to the reciever? My reciever does'nt have a bolt. Should it? Or Is the Warn shackle supposed to come with 2 bolts?

NCC-1864 · **Posted:** Fri Apr 23, 2010 10:12 pm

You put your shackle's bolt into your Warn receiver bracket
and you put your Warn bracket into your 2" rear hitch with a 1/2 " locking pin

Uploaded with ImageShack.us

Khaki-KJ · **Posted:** Sat Apr 24, 2010 7:25 am

My Warn shackle reciever never came with a bolt, I just used the same bolt / nut / washers from the trailer hitch. I have one of the pins that NCC-1864 has mentioned, but I decided against going that route for loss prevention reasons. I do not want somebody helping themselves to my property. I find it takes a couple of minutes to make the swap.

nosnorb_808 · **Posted:** Sat Apr 24, 2010 7:42 am

Hmm... My reciever never had a bolt. Looks like I will be contacting the dealer or jparts. Thanks for the replies guys!

Khaki-KJ · **Posted:** Sat Apr 24, 2010 9:27 pm

The trailer hitch bolts do not come with the hitch reciever, or the trailer hitch. You have to buy the bolt, nut and washers separately. Any Home Depot, Lowes or hardware store will have what you need. If you decide to go with the hitch pin, that will be in the same area as the trailer hitch.

DirtyKK · **Posted:** Sat Apr 24, 2010 9:32 pm

yea they dont come with...

mag03kj · **Posted:** Sat Apr 24, 2010 9:46 pm

I never understood the OP!

Warn reciever shackle bracket

Who is online