LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
Exo Roll Cage http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=52607 |
Page 1 of 1 |
Author: | extreme_kj [ Mon May 10, 2010 8:51 am ] |
Post subject: | Exo Roll Cage |
Has anyone ever install a roll cage, not internal, external on his KJ? something like this.. wondering... |
Author: | JL Rockies [ Mon May 10, 2010 9:42 am ] |
Post subject: | Re: Exo Roll Cage |
No. |
Author: | jnaut [ Mon May 10, 2010 3:30 pm ] |
Post subject: | Re: Exo Roll Cage |
Wait until the KJ's are as old and missing doors as the vehicle in your picture is. |
Author: | teckman02 [ Mon May 10, 2010 3:37 pm ] |
Post subject: | Re: Exo Roll Cage |
try this link http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=59&t=30037 and this link http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=59&t=41214 |
Author: | extreme_kj [ Mon May 10, 2010 3:46 pm ] |
Post subject: | Re: Exo Roll Cage |
teckman02 wrote: try this link http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=59&t=30037 and this link http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=59&t=41214 Wow.. Thanks teckman !!! |
Author: | riptricket [ Mon May 10, 2010 10:56 pm ] |
Post subject: | Re: Exo Roll Cage |
that's the one I was going to upload... but couldn't find it on cardomain... |
Author: | jeepmedic46 [ Tue May 11, 2010 7:49 pm ] |
Post subject: | Re: Exo Roll Cage |
I've been thinking about a exo roll cage as well. Not sure how to secure it with a stock bumper. I'm going to be going with a Detours Backbone and not a ARB bumper. |
Author: | tommudd [ Tue May 11, 2010 8:27 pm ] |
Post subject: | Re: Exo Roll Cage |
Be real hard to build a full exo cage with out attaching to a real full width steel bumper |
Author: | GeekyJeep [ Tue May 11, 2010 8:29 pm ] |
Post subject: | Re: Exo Roll Cage |
jeepmedic46 wrote: I've been thinking about a exo roll cage as well. Not sure how to secure it with a stock bumper. I'm going to be going with a Detours Backbone and not a ARB bumper. do they make a backbone for the libby? |
Author: | GeekyJeep [ Tue May 11, 2010 8:31 pm ] |
Post subject: | Re: Exo Roll Cage |
GeekyJeep wrote: jeepmedic46 wrote: I've been thinking about a exo roll cage as well. Not sure how to secure it with a stock bumper. I'm going to be going with a Detours Backbone and not a ARB bumper. do they make a backbone for the libby? *sigh* took my own advice from work and googled it.... |
Author: | extreme_kj [ Wed May 12, 2010 2:33 am ] |
Post subject: | Re: Exo Roll Cage |
From what i see i believe that a full exo cage is very difficult to be done to a kj. I think the problem is with the rear side and especially with the rear fenders. You don't have space to work on. I mean what's the meaning to make a cage like this if your side protection is almost zero. |
Author: | JeepinJarhead03 [ Wed May 12, 2010 2:52 am ] |
Post subject: | Re: Exo Roll Cage |
add heavy tube tail light guards similar to whats on my TR rear bumper and fork from the tail light guards you're right, it gives some very odd bends in the tube to do an exo to the rear bumper without some sort of side protrusion similar tube builds would make an exo much easier than with a non-guarded rear bumper |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |