installing boulder bars

corwyyn · **Posted:** Mon Jul 18, 2005 1:36 am

Hey out there, does anyone have any info on installing boulder bars on an '03? I just purchased a set from dynamike here in AZ but he did not have the instructions available.

JJsTJ · **Posted:** Mon Jul 18, 2005 7:42 am

Your best bet is to get hold of the templates for drilling the pinch weld holes. Once those are drilled correctly, the holes at the frame just need to be drilled and bolts installed. You should be able to get the template from All J and I am sure Quinnn could offer other advice. Look them up at www.boulderbars.com, their number is on there.

Calvin56 · **Joined:** Fri Jul 08, 2005 1:59 am **Posts:** 345

If you are near Tucson, I've got the Destructions (er instructions) and the template. Otherwise I can ship them to you.

On a separate note- if you have a buddy with a 90 degree drill, it is pricelesss for the interior mounting bolts. I didn't have a short enough bit/drill so I had to wait to get a couple of the holes drilled to make sure they didn't comeout crooked.

corwyyn · **Posted:** Tue Jul 19, 2005 2:39 pm

Actually I am in Mesa and am planning on coming down to Tucson Sunday for the AZLOSTKJ meeting. If you are going to be there bring them along; if not let me know and maybe we can arrange to meet somewhere on another day.

Calvin56 · **Joined:** Fri Jul 08, 2005 1:59 am **Posts:** 345

I'll be there.

corwyyn · **Posted:** Sat Jul 23, 2005 3:30 am

Frack, crud, crimmenies! I won't be able to attend the AZ LOST meeting this sunday. But at least I got an e-mail from Quinn at All Js and he can mail me a template. Thanks for the offer of help all the same.

installing boulder bars

Who is online