| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| FRONT BRAKE JOB QUESTIONS. http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=54785 |
Page 1 of 1 |
| Author: | BadKarma1701 [ Sun Aug 08, 2010 11:26 am ] |
| Post subject: | FRONT BRAKE JOB QUESTIONS. |
I dont have a chiltons book yet and need to do the front brakes. When i bolt back on calipers what is the tork for the caliper bolts? The rotors i picked up look like they slide over a hub and studs. Is the rotor pressed on or does it ride along with the caliper. if not pressed but snug do i use a rubber mallet to get off old ones and put on new ones. Do i pull the whole hub all the way to spindle like a chevy blazer thanks |
|
| Author: | jeepskate [ Mon Aug 09, 2010 4:27 am ] |
| Post subject: | Re: FRONT BRAKE JOB QUESTIONS. |
Torque for the caliper bolts is 11 ft-lbs. At least that's what the factory manual says for my 2002. Here's a writeup on the procedure: http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=16&t=5142&start=0&bookmark=1&hash=d020a17a |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|