Anyone here run them?
For $260 and free shipping the 4 Wheel Parts store 15 mins from me for front struts Part #: RANRS5264 and rear shocks #: RANRS5284 plus a $50 Visa gift card when bought together is great price and I have some extra cash so I figured now was a good time to get step 2 and 3 of the lift!
And I already have a set of OME HD springs up front.
Are they still good, since its hard to find the RSXs and they are a bit more expensive...
Any advice?
Thanks!

i have a set of rsx's for the front for sale with OME springs for 250 total... they were Budke's old ones and i never installed them... only have 4k miles on them... i got rid of my libby before i installed them...

_________________
02 TJ 115k- yes i know i got it in August and have put 25k miles on it.
3" zone offroad lift, lockrite rear locker and solid diff cover
rock rails, fr/r bumpers from trail-gear.com
mml & 1.25in bl awaiting install (i'm lazzzzyyyy!!)
31x10.50x15 toyo open country a/t's

That would be good, but i already have the front springs...

I run RS5147's in the rear- Durango length and RS5764's in the front. $230 total, plus the $50 rancho extreme deal rebate. And if you create a new account on Amazon, you can sign up for the Amazon Prime 1 month trial- that will give you free shipping, then you can cancel your trial. Thats what i did and they ride great. Good Luck!

_________________
Dalton Caudell
Jeep Liberty: Sold... Build Thread: http://www.jeepkj.com/forum/showthread.php?t=45924
Red Jeep XJ: Build thread: http://www.cherokeeforum.com/f46/project-bigfoot-69539/ OR viewtopic.php?f=68&t=57768

RS's are the cheaper next step down line of shocks for Rancho's RSX'x were and are great shocks, right valving etc for our heavy little pigs

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

Wait a minute, aren't both those Rancho shock part numbers for 0" of lift? Aren't you planning a lift kit installation? Won't you need longer shocks like maybe the rear shock Rancho RS5248's? I'm not positive what you'll need up front for a lifted Libby.

I'm in Canada and I've had bad experiences with 4 Wheel Parts, specifically the UPS shipping & duty charges when my parcels cross the border.

_________________
my trail & highway ride (and occasional tow rig)
04 Liberty Sport with a 2.5" lift, ProComp 245/75R16 AT's and two Hella700FF lamps (more accessories to come)

my trail queen
95 YJ with a RE 4" lift, 33" ProComp Extreme's, M8000 Winch, Lockrite Locker up front, Super35 in the rear and 4.88 gears

They do say on the 4WD.com website for 0" lift but I beleive they will work for a OME spring setup.
Not sure if they are actually longer or just capable of holding the longer stiffer springs?
I am still torn on what to get...