My clevis slipped and I'm leaning. I'm gonna try and throw in some spacers, but there was some debate as to what size the strut is in this thread...

http://www.lostjeeps.com/forum/phpBB3/vie ... t&start=15

Now, I *could* get out there in the cold Chicago weather and measure them, or I could be lazy and just ask what the diameter of the strut is

Thanks

_________________
jeep movies: http://users.catastrophe.net/~eric/jeepmov/
other stuff: http://www.zischen.org/

3/8" I think, or two 2" ID conduit washers.

_________________
Men, we don't improve ourselves, we improve our stuff!

I have the Rusty's Coil lift and the struts with that measure 2 1/4" dia. I thought they were 2" and found out the hard way they were bigger when my first spacers were 2" ID and didn't even come close to fitting. And as stated in the other thread the spacers are 7/16" in height and about 3/16" wall thickness.

_________________
2002 Red KJ Limited, Off-Road Package, Trac-Loc Rear, Manik Brush Guard, PIAA Fog Lights
Boulder Bars, Rusty's 2.5" Coil Lift, JBA UCA's Gen 4.5, General Grabber AT2's 245/75/R16
Original Lost Member# 000507

I have the 2in conduit nuts and they fit perfect. They do not fit the stock stuts but they do fit others.

My thread.

http://www.lostjeeps.com/forum/phpBB3/vie ... php?t=5505

Pics are in there.

_________________
LOST KJ'S
Where are you going???
Current Jeep: 2004 Jeep Liberty
-Atlantic Blue
-Air Ride Rear Suspension ; OME/Rustys Lift ; Powertrax Locker ; Moog Lower Ball-Joints ; 245/70/16 Yokohama Geolander A/T-S's on MOABS ; Flowmaster 50 SUV
Lost #007082
http://www.cardomain.com/id/jeepjeepster