You have 6 bolts on both ends to remove. Then push it towards the front some pop the rear out then the front, easy 10 minute job
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Transfercase to front axel drive shaft removal http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=55733 |
Page 1 of 1 |
| Author: | BadKarma1701 [ Sun Sep 19, 2010 4:03 pm ] |
| Post subject: | Transfercase to front axel drive shaft removal |
Transfercase to front drive shaft removal. This is my first jeep and first vehicle with CV joints. I pulled out all 6 bolts from CV joint at transfercase side. It wont come out. I push and pull and it wont move. I am use to the 4 bolts on a drive shaft, push and pull the sucker come's out. It is still in the air and I need to get it out so I can go to work tomorrow. How do I get this thing out. Thanks |
|
| Author: | tommudd [ Sun Sep 19, 2010 5:15 pm ] |
| Post subject: | Re: Transfercase to front axel drive shaft removal |
You have 6 bolts on both ends to remove. Then push it towards the front some pop the rear out then the front, easy 10 minute job
|
|
| Author: | BadKarma1701 [ Sun Sep 19, 2010 7:21 pm ] |
| Post subject: | Re: Transfercase to front axel drive shaft removal |
ok got the front and rear cv joints out of the cups? cant get drive shaft out. lift the rear to make the front clear and rear cv hangs up on speedo braket. lift the front cv and there is no were for rear to slide out, not enough clearance. do i hace to drop exhaust or tranny support? |
|
| Author: | tommudd [ Sun Sep 19, 2010 7:35 pm ] |
| Post subject: | Re: Transfercase to front axel drive shaft removal |
What year do you have? speedo bracket? |
|
| Author: | BadKarma1701 [ Sun Sep 19, 2010 7:38 pm ] |
| Post subject: | Re: Transfercase to front axel drive shaft removal |
year is a 2002. i just called it that caues thats what it kinda looks like. the bracket is on the driver side of the tranny |
|
| Author: | BadKarma1701 [ Sun Sep 19, 2010 8:29 pm ] |
| Post subject: | Re: Transfercase to front axel drive shaft removal |
looked at what i thought was a speedo cable. it looks like the cable to transfercase form lever in cabin. |
|
| Author: | 03CDKJ [ Sun Sep 19, 2010 9:29 pm ] |
| Post subject: | Re: Transfercase to front axel drive shaft removal |
Remove the rear first.... push it up and to the right. Then compress the front and slide the driveshaft down and out. Hope this helps... 
|
|
| Author: | BadKarma1701 [ Sun Sep 19, 2010 9:45 pm ] |
| Post subject: | Re: Transfercase to front axel drive shaft removal |
I tired that. the rear cv joint goes behind transfercase cable braket and hangs up. if i get it out and down at the nose and back is in the air. i compress the front cv joint and the front cv joint hangs up on a cross support while the rear is hitting under body. may have to drop exhaust ugh. ideas anyone? |
|
| Author: | BadKarma1701 [ Mon Sep 20, 2010 9:57 am ] |
| Post subject: | Re: Transfercase to front axel drive shaft removal |
Well have to drive the wifes car today. This thing is a pain in the backside. lol. Ideas anyone? |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|