so i have a 2005 black renegade ome hard springs front and back racnchos in the front and ome shocks in the back and just put 265/70/16's on moabs on and wanted more lift after 6 months of the springs being put on. i have top plates and 2 1/2" front and rear spacers sitting around that i would like to have thrown on for more lift is that a good or bad idea? also have no idea who makes the spacer lift? that i bought used from some one last year on ebay that i never used and went smart the first time.

thanks brian

First welcome to LOST
Second, not sure what you mean about hard springs?
Third, not being a jerk but read some on here about what you are thinking about doing
Fourth, I'll just say its a BAD idea.....................using the 2.5 inch spacers that is, real bad

Nothing more

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

im sorry that i am retarted i ment to say i have old man emu hard springs (forgot number value of the 2 sets) front and rear and one extra rear isolator on the bottom . but i wanted to add theses spacers front and rear to the old man emu springs and top plate even after read a little bit that its bad and imput will help

More than likely you have the 927s front, and 948s in the rear
Whatever they are you can not add them ( the spacers) to the lift, you'll be way too high and the CVs will hate you.
Add the top spacer and a 3 ring clevis to the front, and another top isolater on each side in the rear and be done

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

you are exactly right thoses are the springs i have and have and also i added one extra isolator in the back.

You can run two extra isolators on each side in the rear
A top plate and 3 ring clevis will add another inch or so to your existing lift

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

ALWAYS listen to tom, He helped me a year ago this month when my front end was sagging so badly! I recently bought spacers and conduit nuts from him ( they are not installed yet). He knows his way around the suspension of a KJ I must say!

_________________
04 Rocky mountain KJ (SOLD)
OME Front Kit 790 springs on OME NS131s
skyjacker rear shocks and springs
ARB Deluxe bumper w/ Warn 9500i
Skid plates all under
ARB On-board Air w/ Front & Rear Air Lockers
JBA 4.5 UCA's
Lots O' Lights

"If it ain't broke...it might be after i try this!"