LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Another Front Diff Blown!
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=6006		 Page 1 of 2
Author:  KJ-BOL [ Mon Feb 20, 2006 6:15 pm ]
Post subject:  Another Front Diff Blown!
It happened the same way as most of them....
Tires spinning freely in the air - KJ comes down onto front tires, take grab of the ground and first thing it goes crack is the Front Diff
Is there anything going with DC trying to fix this problem?

As temporary fix, therewas a thread a while ago about re-inforcing the front diff:

http://www.lostjeeps.com/forum/phpBB3/vie ... al&start=0

just want to share

EDIT: BakerKJ was the victim - not mine - sorry - should have been more specific.
Author:  CaKJFreedom [ Mon Feb 20, 2006 6:28 pm ]
Post subject: 
Can you hear the group "oooooo/noooo" as people read your subject line?

Sorry to hear about your diff. Any hope of a warranty repair?
Author:  Bakerkj [ Mon Feb 20, 2006 6:56 pm ]
Post subject: 
Yep, It's covered.
Author:  DaveKJ02 [ Mon Feb 20, 2006 7:16 pm ]
Post subject: 
Ugh no!! You had Eddo's collar reinforcement on and it still happened??
Author:  pixeldzn [ Mon Feb 20, 2006 7:27 pm ]
Post subject: 
DaveKJ02 wrote:
Ugh no!! You had Eddo's collar reinforcement on and it still happened??


nope no reinforcement, but bet we will all be reinfocing ours out here in Chicago now.
Author:  JJsTJ [ Mon Feb 20, 2006 7:32 pm ]
Post subject: 
Bakerkj wrote:
Yep, It's covered.


Yours? Or someone elses? Got any pics of the carnage? :shock:

Stupid D30A! :evil:
Author:  DaveKJ02 [ Mon Feb 20, 2006 7:41 pm ]
Post subject: 
I'm on that collar site. Should galvanic corrosion be entering my head to figure out which one I should get, or not a concern? The case is aluminum-and they make one in aluminum? I was going to go with steel.
Author:  Bakerkj [ Mon Feb 20, 2006 7:42 pm ]
Post subject: 
I'm going to get pics when I pick it up on wednesday. I told them to save the carnage until i get there.
Author:  Jeepjeepster [ Mon Feb 20, 2006 7:51 pm ]
Post subject: 
CaKJFreedom wrote:
Can you hear the group "oooooo/noooo" as people read your subject line?

Sorry to hear about your diff. Any hope of a warranty repair?


Haha, i did. Glad to hear its under warranty!
Author:  VTNomad [ Mon Feb 20, 2006 9:35 pm ]
Post subject:  Steel and aluminum
My only concern with putting a steel collar on is the it could (highly unlikely) seize to the aluminium housing. So it could make things difficult if you ever (no reason I can think of) have to take it off.
Author:  KJ04 [ Mon Feb 20, 2006 10:06 pm ]
Post subject: 
Welcome to the blown housing club, I feel for ya. I had to replace my own.
Author:  Bakerkj [ Mon Feb 20, 2006 11:01 pm ]
Post subject: 
Quote:
Welcome to the blown housing club, I feel for ya. I had to replace my own.


The Blown Housing Club Sucks. :evil:
Author:  USAFCOP [ Mon Feb 20, 2006 11:36 pm ]
Post subject: 
Can we get all the specs and a write up on this collar to include testimonials as to how and why it "works" the collar itself, modifications to same, and price and place to get it in the Tech section.
Author:  bennybmn [ Mon Feb 20, 2006 11:47 pm ]
Post subject: 
If you paint the collar well before installing it, I doubt you'll have to worry about any galvanic action. A little loctite or never-sieze on the fasteners.. something to prevent them from locking and you're all set.
Author:  chefdab [ Tue Feb 21, 2006 12:59 am ]
Post subject: 
But would that collar make any difference when opening up the diff to put in a locker or gear swap?
Author:  Ed [ Tue Feb 21, 2006 1:45 am ]
Post subject: 
I don't think the diff housing is supposed to open up at the place where the collar goes around it, the idea is that it's a solid piece of cast Aluminium. You get at the gears for locker/re-gearing installation at the other end, so even if (worst case scenario) it corroded and seized on there then it wouldn't matter since there's no reason to ever take it off.
Author:  Troysterr [ Tue Feb 21, 2006 2:13 am ]
Post subject: 
Of course, the collar is a theoretical solution at this point, and it will be very difficult to validate its effectiveness...but I think it's worth a shot.

If we got 20 or 30 of us to install them and none of us managed to grenade a diff for a year or two, that might be pretty strong evidence that it works.
Author:  ManicMechanicJoe [ Tue Feb 21, 2006 3:32 am ]
Post subject: 
this collar can't hurt anything and for $20 or $30 I am willing to try it out...

I think the big thing here is conservative driving style, perhaps low and slow is the only way to get through this untill someone figures out what we need to do swap in the GC's AAM front axle.
Author:  krazz1e [ Tue Feb 21, 2006 11:23 am ]
Post subject: 
Do you have a front locker?

Sorry to hear about the breakage. Thankfully Jeep is stepping up and covering it.
Author:  Bakerkj [ Tue Feb 21, 2006 1:16 pm ]
Post subject: 
No front locker.
Page 1 of 2 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/