| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Mounting PIAA 510 Fogs in ARB http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=60543 |
Page 1 of 1 |
| Author: | PathFinder7 [ Thu May 05, 2011 1:28 pm ] |
| Post subject: | Mounting PIAA 510 Fogs in ARB |
I've searched and found nothing on this so I apologize if it's already answered somewhere. I bought a set of PIAA 510 ATP fog lights to replace my jacked up stock lights in my ARB bumper on the KJ. However, I cannot seem to get them mounted in a decent position so they fit the hole and point correctly. Does anyone have a clever way of mounting them in there? I've tried some basic metal working, usually involving bending and whatever I can cut with a Dremel. Any ideas or write ups are appreciated, I don't have access to any real metal tools, just a butane torch, some brute strength and loads of ignorance. Thanks |
|
| Author: | tommudd [ Thu May 05, 2011 2:24 pm ] |
| Post subject: | Re: Mounting PIAA 510 Fogs in ARB |
I'm sure someone has done it but can't remember anyone since I've been on here. Why not just use the stock fogs? Whats wrong with yours? |
|
| Author: | PathFinder7 [ Thu May 05, 2011 3:37 pm ] |
| Post subject: | Re: Mounting PIAA 510 Fogs in ARB |
Well, one got a bit melted from an HID experiment and the other has a broken bracket, and neither of them put out any amount of light. To replace them was about the same price as the 510s so I figured an upgrade was in order. I didn't realize it would be so difficult to mount them. Perhaps someone will have some ideas, in the meantime, I'll keep bending metal. Thanks Tom. |
|
| Author: | PathFinder7 [ Fri May 06, 2011 4:24 pm ] |
| Post subject: | Re: Mounting PIAA 510 Fogs in ARB |
Seriously? No one has ever done this? It's an original idea? Bueller, Bueller, Bueller.... |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|