from my mosty recent experience, they dont really provide help with anything anymore
http://www.lostjeeps.com/forum/phpBB3/vie ... highlight=
first off, lets hope you got the right one (rusty's seems a bit unsure about which skid fits which years). if you did, it is my understanding that the bolt holes will line up with the mounting bolts for the crossmember (in the back) and the front crossmemeber that the stock front skid is mounted to (for the front). if the holes all line up, just use the stock bolts and bolt it up. make sure you put the front of rusty's skid under the oem front skid.
from what i could see, the bolt they provide is for the front right hand side. it should go all the way through the crossmember and use a nut on the end
of course mine didnt work out so well and took alot of modding to finally get it to work. this was on an 04 though.
it hangs so low i am sure it will get ripped off anyway
