LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
Rear axel r to l movement http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=62883 |
Page 1 of 1 |
Author: | Heepjeep04 [ Thu Sep 29, 2011 2:17 am ] |
Post subject: | Rear axel r to l movement |
When I let off the gas it feels like the axle shifts and then shifts back to the other side when you get on the gas. I have gone over all the bolts on the control arms and the upper a arm my only guess is that it is the ball joint in the upper a arm. Does this sound correct to any one else. |
Author: | At The Helm [ Thu Sep 29, 2011 2:27 am ] |
Post subject: | Re: Rear axel r to l movement |
Track bar maybe? Look to see if any holes are oval shaped instead of circular. |
Author: | RED_KJ_666 [ Thu Sep 29, 2011 6:30 am ] |
Post subject: | Re: Rear axel r to l movement |
We don't have a Track Bar! My $$$ as always is on the upper Tri-Link bushings, and I bet ![]() ![]() |
Author: | At The Helm [ Thu Sep 29, 2011 11:51 am ] |
Post subject: | Re: Rear axel r to l movement |
RED_KJ_666 wrote: We don't have a Track bar! Doh! ![]() |
Author: | Heepjeep04 [ Thu Sep 29, 2011 3:03 pm ] |
Post subject: | Re: Rear axel r to l movement |
Yea it's probably about time it has 130,000 mi on it |
Author: | tommudd [ Thu Sep 29, 2011 3:31 pm ] |
Post subject: | Re: Rear axel r to l movement |
My first tri link ball joint went at 90,000 or so, second junk one ( brand new but junk) went at 130,000 the rear LCA started letting me wiggle my behind at 150,000 or so, at 160,000 it was bad, had over 3/4 inch of movement in the left arm |
Author: | RichardM [ Wed Oct 12, 2011 4:53 pm ] |
Post subject: | Re: Rear axel r to l movement |
That's exactly what mine is up to. I have 16100km or 98000miles on it. I need to get new bushes etc but I'm in South Africa ! |
Author: | bunkermonkeycw [ Wed Oct 12, 2011 6:29 pm ] |
Post subject: | Re: Rear axel r to l movement |
Yeah these bushings we speak of corrected all handling issues that I had back there. Felt like I'd flip all the time... Knocking on wood. |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |