start the back up into the slot, have it lubed good with some slippery type liquid and then use a 2X4 to push it up in, you can also take a screwdriver and help coax the front part to pop in.
They can be a real pain at times
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Teraflex bump stop install help http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=63190 |
Page 1 of 1 |
| Author: | spitfire36o [ Sun Oct 16, 2011 6:14 pm ] |
| Post subject: | Teraflex bump stop install help |
Does anyone have a trick to get these in? |
|
| Author: | tommudd [ Sun Oct 16, 2011 6:16 pm ] |
| Post subject: | Re: Teraflex bump stop install help |
start the back up into the slot, have it lubed good with some slippery type liquid and then use a 2X4 to push it up in, you can also take a screwdriver and help coax the front part to pop in. They can be a real pain at times
|
|
| Author: | VMKJCRD [ Sun Oct 16, 2011 8:27 pm ] |
| Post subject: | Re: Teraflex bump stop install help |
Pop them in the freezer for an hour. Didn't try that with mine but heard that also works. |
|
| Author: | bugnout [ Sun Oct 16, 2011 8:47 pm ] |
| Post subject: | Re: Teraflex bump stop install help |
Lube them up and use a 2x4 or crow bar to seat them. I struggled with mine till I figured out that I needed a lever. They popped right in. |
|
| Author: | infernicus [ Sun Oct 16, 2011 9:13 pm ] |
| Post subject: | Re: Teraflex bump stop install help |
Good old fashioned muscle! 
|
|
| Author: | daltus [ Sun Oct 23, 2011 4:00 pm ] |
| Post subject: | Re: Teraflex bump stop install help |
I used a heat gun to warm it slightly and force it in with a flathead screwdriver. |
|
| Author: | spitfire36o [ Mon Oct 24, 2011 10:45 am ] |
| Post subject: | Re: Teraflex bump stop install help |
Thanks for all the suggestions. I ended up putting some lube on them and using a 2 x 4 on top of the wheel to push them in. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|