| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| 4:10 gears for 07 Liberty http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=63225 |
Page 1 of 1 |
| Author: | fasta76 [ Mon Oct 17, 2011 9:15 pm ] |
| Post subject: | 4:10 gears for 07 Liberty |
Was wondering where guys are getting front gears for the liberty? I'm in Canada so if anyone can tell me a place here would be great! If not anyplace would work. |
|
| Author: | tommudd [ Mon Oct 17, 2011 9:56 pm ] |
| Post subject: | Re: 4:10 gears for 07 Liberty |
One place that was able to get them was Trail Quest located here in Ohio, I think they shipped to Canada local number 614-873-8337 great place to deal with sure there are other places as well |
|
| Author: | fasta76 [ Mon Oct 17, 2011 10:14 pm ] |
| Post subject: | Re: 4:10 gears for 07 Liberty |
Thanks so much! |
|
| Author: | 2006 KJ [ Mon Oct 17, 2011 11:00 pm ] |
| Post subject: | Re: 4:10 gears for 07 Liberty |
be careful with the size of bolts that hold the carrier to the ring... they changed them some where 05-06ish. I suggest adding a carrier replacement locker (detroit no slip, detroit tru trac, ARB.. ect..) that way you can just match the bolts in the locker to the bolts in the ring gear. i just got my 4.10's for the 8.25 from 4wd.com i talked to woody there... he really knew his stuff. for the front i changed the diff to one that came out of a 4cyl KJ that came with 4.10s |
|
| Author: | Ryn7 [ Tue Oct 18, 2011 7:22 pm ] |
| Post subject: | Re: 4:10 gears for 07 Liberty |
We're in B.C. and I bought my gears and rebuild kits from Jeepin' By Al. As always, excellent service. |
|
| Author: | fasta76 [ Tue Oct 18, 2011 9:47 pm ] |
| Post subject: | Re: 4:10 gears for 07 Liberty |
Ryn7 If you dont mind me asking what did it cost you to do the swap? |
|
| Author: | RED_KJ_666 [ Thu Oct 20, 2011 9:57 pm ] |
| Post subject: | Re: 4:10 gears for 07 Liberty |
http://www.justdifferentials.com/ |
|
| Author: | fasta76 [ Sat Oct 22, 2011 2:53 pm ] |
| Post subject: | Re: 4:10 gears for 07 Liberty |
Do you guys think the 4:10 gears would be to much for 245/75/16? i just noticed the trany hunts all the time with the stock 3:73 gears |
|
| Author: | tommudd [ Sat Oct 22, 2011 3:10 pm ] |
| Post subject: | Re: 4:10 gears for 07 Liberty |
Chris ( 03CDKJ) is running 265-70-16s ( pretty much same height as 245-75s) and 4.10s with no problems Really with the 265-75s I wish mine were lower than 4.10s |
|
| Author: | fasta76 [ Sat Oct 22, 2011 3:51 pm ] |
| Post subject: | Re: 4:10 gears for 07 Liberty |
Tommudd, Thanks for the reply! I never figured it would be as bad as it is. If you on the Highway its ok but any hill it hunts all over. When towing my 10 tent trailer its even worse. I just don't want to lose a tone of MPG. I have the magnaflow catback and the ram-air intake from a member on here. It runs great but could sure you some help when towing. Was thinking of the Jet chip but have herd many bad reviews on them! |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|