| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| What is the difference in lower ball joints? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=64522 |
Page 1 of 1 |
| Author: | joejeeper420 [ Thu Jan 05, 2012 7:47 pm ] |
| Post subject: | What is the difference in lower ball joints? |
Between the 02-05 and the 06-07?? Is it the balljoint or the lower control arm itself? And where did my rack and pinion post go?? |
|
| Author: | joejeeper420 [ Thu Jan 05, 2012 8:12 pm ] |
| Post subject: | Re: What is the difference in lower ball joints? |
I just called a dealer on the west coast and he verified that from the factory the lower ball joint part numbers are the same from 02-07... But I bought some mevotech mk80767 lower ball joints... Only to see online that they are for 06-07 and 02-05 is like k3199 or something... Anyone know why there would be a difference? |
|
| Author: | tjkj2002 [ Thu Jan 05, 2012 9:24 pm ] |
| Post subject: | Re: What is the difference in lower ball joints? |
joejeeper420 wrote: I just called a dealer on the west coast and he verified that from the factory the lower ball joint part numbers are the same from 02-07... But I bought some mevotech mk80767 lower ball joints... Only to see online that they are for 06-07 and 02-05 is like k3199 or something... Anyone know why there would be a difference? If replacing yourself you want the MOOG K3199's as they are the HD versions with a grease zerk.Any others are no better,and in most cases worse then the OEM LBJ's.The LBJ's are pressed into the knuckles. Mevotech is one of the worst brands to get for anything,right there next to the "OEM" brand commonly found at advance auto parts. |
|
| Author: | joejeeper420 [ Thu Jan 05, 2012 9:40 pm ] |
| Post subject: | Re: What is the difference in lower ball joints? |
Ahhh good to know I thought the mevotech ones were ok because they were the "premium" version that are greasable as well. I'll take your advice though. One more question because I know you are a guru on these boards... My lower ball Joint failed a few weeks ago... Tearing apart my suspension pretty bad. My rack and pinion is toast... So I bought a used one... On one side it has a good amount of tension when I move the tie rod end up and down... On the other side there is some tension but clearly not as much as the other side... Does this mean I have another bad rack... Or does it maybe have something to do with no fluid/pressure??? |
|
| Author: | joejeeper420 [ Thu Jan 05, 2012 9:52 pm ] |
| Post subject: | Re: What is the difference in lower ball joints? |
And if anyone knows if there is an actual difference in the ball joints / steering knuckles from 02-05 and 06-07... Please chime in... Thanks in advance! LoL I thought I edited the first post... I had lower control arms on the brain because I just ordered all new bushings for em 
|
|
| Author: | joejeeper420 [ Sat Jan 07, 2012 4:44 pm ] |
| Post subject: | Re: What is the difference in lower ball joints? |
Moogs are on the way as well as new strut fork to lower control arm bushings so I think that just about covers it all... Minus new springs and struts/shocks... But I don't mind takin her apart again just to put those in...
|
|
| Author: | KJScott [ Sun Jan 08, 2012 12:07 am ] |
| Post subject: | Re: What is the difference in lower ball joints? |
I will be replacing mine soon, crawled under today and the boots are shot on the lowers. Hope it survives next weekend going wheelin.... |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|