| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| LBJ http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=66237 |
Page 1 of 1 |
| Author: | BountyHunter [ Wed Apr 04, 2012 7:41 pm ] |
| Post subject: | LBJ |
I just got a LBJ from Napa and it has a grease fitting on top. Is there enough room between the top of the BJ and the bottom of the CV to fit this? Or did I get the wrong LBJ. |
|
| Author: | tommudd [ Wed Apr 04, 2012 7:47 pm ] |
| Post subject: | Re: LBJ |
If its right on top no there won't be enough room to grease it |
|
| Author: | BountyHunter [ Wed Apr 04, 2012 8:08 pm ] |
| Post subject: | Re: LBJ |
tommudd wrote: If its right on top no there won't be enough room to grease it It is right on top. Is this the wrong BJ? |
|
| Author: | woodtick [ Wed Apr 04, 2012 8:10 pm ] |
| Post subject: | Re: LBJ |
tommudd wrote: If its right on top no there won't be enough room to grease it I wondered about this too. If one were to change the fitting to a 90 degree zerk would you be able to grease it? |
|
| Author: | tjkj2002 [ Wed Apr 04, 2012 10:39 pm ] |
| Post subject: | Re: LBJ |
woodtick wrote: tommudd wrote: If its right on top no there won't be enough room to grease it I wondered about this too. If one were to change the fitting to a 90 degree zerk would you be able to grease it? No room for a 90 degree fitting. And no it's not the wrong LBJ just bad placement of the grease zerk.The MOOG K3199 LBJ's is what you want with the zerk on the side of the LBJ. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|