Question about OME lift for my CRD

CRD Joe · **Posted:** Fri May 11, 2012 11:28 pm

I read the "Read me first" and came up with this:

OME lift: front OME 927 or 790 coils* - NS131 shocks / OME 948 - N132 or **N132L (+2,5”) / Rancho RSX 17004 shocks for the rear.

My question is, will I need anything else to equal the lift that I would get going with the more expensive Franky special?

For example any rear spacers etc etc etc.

Thanks in advance.

All3Sports · **Posted:** Sat May 12, 2012 8:28 am

790 springs for your CRD and I don't think the RSX 17004 is still in production. I've heard use either the OME rear extra length shocks or go with a shock for a 4wd 99-04 durango.

To get as close to the frankenlift as possible without spending the money isn't too expensive, just add a 1/4 top plate and a clevis lift. You won't be exactly at the same height but for the money it's a cheaper lift. I'm not sure on the rear, I checked their site and it never mentioned a spacer for the rear.

cgass · **Posted:** Sat May 12, 2012 8:59 am

You'll want 2 upper rear isos per side. You can get them off JBA. For rear shocks you could do Bilstein as well.

Sent from my Galaxy Nexus

CRD Joe · **Posted:** Sat May 12, 2012 11:47 am

Thanks. I cant seem to find those isolators on JBA's site.

cgass · **Posted:** Sat May 12, 2012 11:50 am

CRD Joe wrote:

Thanks. I cant seem to find those isolators on JBA's site.

Here you go http://jeepinbyal.com/prod-Rear_upper_coil_spring_isolator-668.aspx

The picture is deceptive, they're not sold in pairs. That price is for 1.

CRD Joe · **Posted:** Sat May 12, 2012 12:28 pm

Thanks Gass.

Question about OME lift for my CRD

Who is online