Driving down the highway and I lost the rubber strip that goes on the top.
Is it really needed?
I was looking at it, and it is still sealed, so wondering yalls opinions.

Thanks!

If your glue gets warm it will leak. It's there for a reason. Any auto glass place should be able to replace it.

_________________
2006 crd
Orm and ehm
Straight pipe and filter box mods
Ome lift with 31x10.50 tires and 15x10 wheels
Bedlined flares and rockers
Tj custom bumper mod
Scorpion diesel tuner

Your refering to the rubber trim piece right? matches the sides of the windshield?

I never had this piece of trim - from the factory, There was a discussion on LOST some time about about this piece of trim. I think we came to the conclusion that sometime in 2005 they stopped putting that piece of trim over the top of the windshield at the factory.

_________________
2005 CRD "Ol' Blue"
Red Ryder carbine-action, two hundred shot range model air rifle with a compass in the stock and this thing which tells time.
My build page- RL Komodo Rear and TJM Front Bumper, armored, lifted, JBA Steel D30, 4.10s and ARB air lockers.

My 04 never had that piece across the top
The windshield is sealed and if the glue gets that warm to leak you'll have more issues that worrying about the winshield!!

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited