LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Question about OME lift for my CRD
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=66856		 Page 1 of 1
Author:  CRD Joe [ Fri May 11, 2012 11:28 pm ]
Post subject:  Question about OME lift for my CRD
I read the "Read me first" and came up with this:

OME lift: front OME 927 or 790 coils* - NS131 shocks / OME 948 - N132 or **N132L (+2,5”) / Rancho RSX 17004 shocks for the rear.

My question is, will I need anything else to equal the lift that I would get going with the more expensive Franky special?

For example any rear spacers etc etc etc.


Thanks in advance.
Author:  All3Sports [ Sat May 12, 2012 8:28 am ]
Post subject:  Re: Question about OME lift for my CRD
790 springs for your CRD and I don't think the RSX 17004 is still in production. I've heard use either the OME rear extra length shocks or go with a shock for a 4wd 99-04 durango.

To get as close to the frankenlift as possible without spending the money isn't too expensive, just add a 1/4 top plate and a clevis lift. You won't be exactly at the same height but for the money it's a cheaper lift. I'm not sure on the rear, I checked their site and it never mentioned a spacer for the rear.
Author:  cgass [ Sat May 12, 2012 8:59 am ]
Post subject:  Re: Question about OME lift for my CRD
You'll want 2 upper rear isos per side. You can get them off JBA. For rear shocks you could do Bilstein as well.

Sent from my Galaxy Nexus
Author:  CRD Joe [ Sat May 12, 2012 11:47 am ]
Post subject:  Re: Question about OME lift for my CRD
Thanks. I cant seem to find those isolators on JBA's site.
Author:  cgass [ Sat May 12, 2012 11:50 am ]
Post subject:  Re: Question about OME lift for my CRD
CRD Joe wrote:
Thanks. I cant seem to find those isolators on JBA's site.

Here you go http://jeepinbyal.com/prod-Rear_upper_coil_spring_isolator-668.aspx

The picture is deceptive, they're not sold in pairs. That price is for 1.
Author:  CRD Joe [ Sat May 12, 2012 12:28 pm ]
Post subject:  Re: Question about OME lift for my CRD
Thanks Gass.
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/