| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| custom front recovery for kj http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=66972 |
Page 1 of 1 |
| Author: | jeep78 [ Sat May 19, 2012 10:16 pm ] |
| Post subject: | custom front recovery for kj |
|
|
|
| Author: | At The Helm [ Sun May 20, 2012 1:09 am ] |
| Post subject: | Re: custom front recovery for kj |
Looks good. Is that skid custom made? Does it bolt to any other location other than the engine crossmember? I'm going to fab my own front skid and looking for ideas. |
|
| Author: | jeep78 [ Sun May 20, 2012 4:27 am ] |
| Post subject: | Re: custom front recovery for kj |
Yeah its custom. It bolts on in 6 places, last two bolts just in front of the transfer case. |
|
| Author: | riptricket [ Sun May 20, 2012 12:12 pm ] |
| Post subject: | Re: custom front recovery for kj |
my sign skid...    
|
|
| Author: | jeep78 [ Sun May 20, 2012 6:09 pm ] |
| Post subject: | Re: custom front recovery for kj |
You really need to make sure your nuts/bolts are recessed so that the nuts dont get caught up on rocks etc.. If they do they rip off or bend then you cant take it off when u need to without cutting up your armour. Needs to be designed so you can "slide" over ruts/boulders without getting hung up by protruding nuts/bolts. Im sure most kno this but thought I make the mention so others who try to make their own dont make the mistake. |
|
| Author: | riptricket [ Mon May 21, 2012 11:58 pm ] |
| Post subject: | Re: custom front recovery for kj |
THERE IS NOT A PLACE HERE IN OKC TO CRAWL AT ALL... I AM NOT WORRIED ABOUT IT. |
|
| Author: | surfRenegade [ Tue May 22, 2012 1:54 am ] |
| Post subject: | Re: custom front recovery for kj |
Neither of those skids look like they protect the radiator which has alot of plastic on it that will break easily. I need to make a skid as well. Anyone willing to share some design drawings? |
|
| Author: | jeep78 [ Tue May 22, 2012 8:51 am ] |
| Post subject: | Re: custom front recovery for kj |
If theres no where to crawl then you dont need skids hehe I have never seen a radiator skid before btw.. Thats what a bullbar is for. |
|
| Author: | At The Helm [ Tue May 22, 2012 6:19 pm ] |
| Post subject: | Re: custom front recovery for kj |
I think riptricket's roadsign skid is more to keep the oem engine skid from shoveling mud. |
|
| Author: | jeep78 [ Tue May 22, 2012 6:33 pm ] |
| Post subject: | Re: custom front recovery for kj |
Ah yeah in that case its a good cheap solution. |
|
| Author: | tommudd [ Tue May 22, 2012 7:18 pm ] |
| Post subject: | Re: custom front recovery for kj |
Atthehelm wrote: I think riptricket's roadsign skid is more to keep the oem engine skid from shoveling mud. Thats why I made the first one back in 05 was to keep the mud out of the skid, many have copied even Boiler who sold some  
|
|
| Author: | surfRenegade [ Tue May 22, 2012 7:41 pm ] |
| Post subject: | Re: custom front recovery for kj |
tommudd wrote: Atthehelm wrote: I think riptricket's roadsign skid is more to keep the oem engine skid from shoveling mud. Thats why I made the first one back in 05 was to keep the mud out of the skid, many have copied even Boiler who sold some Is that thick enough to protect the radiator? I was thinking of using diamond plate..not sure where I would connect it in the front. If I use my factory bumper is just going to collapse under any force anyways |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|