Other than the fact that I disagree on his stand on Lunch Box lockers, TJKJ has a point if you are going to do the front diff of a Liberty you may as well go selectable. The Labour will be pretty much the same as the front diff needs to be removed from the Liberty to do the install anyways, if it had a Solid axle and it was as simple as pop cover dump guts reload I'd try and sway you towards the Lunch Box. Unfortunately they aren't factory

if your wallet will allow I would do the ARB in the front or Detroit, those are my

on the situation.
Also Inconsistencies in the mass production of 30a's be damned shock loads will always be the killer of an aluminum housing, look at all the Grands with 44A's in the back out there sporting cracked housings. If you are putting your IFS Liberty places you need a locker you should be aware that it's really only a matter of time before you get to yell
