I have the front drive shaft off to rebuild the CV and I noticed that the front diff is leaking a little gear oil at the pinion.

Is changing this seal possible for a home mechanic? Or will I need all kinds of special tools and guages?

Thanks for any help.

_________________
2002 Liberty Limited
2.5" Rusty's Coil Lift + OME 927 springs + 1/4" spacers
265x70 Revos
Warn 4x Floods
ARB bumper
TeraFlex extended front bumpstops
Rock Lizard Skink Super Sliders
Bosch Size 86 battery
Jeepin by Al's 4.5 UC Arms
Kryptonite Differential Cover
JBA Bolt on KJ Tri-Angulated 4 Link

You should be able to replace it at home yourself.
I have done it on other diffs in my driveway without
any real drama.

Thanks for the reply, it looks like I will need a few tools though. Some kind of pinion seal puller and installer and a spanner wrench for the flange.

Does anyone sell these tools all together in a "seal" kit? What brand would be good to buy?

_________________
2002 Liberty Limited
2.5" Rusty's Coil Lift + OME 927 springs + 1/4" spacers
265x70 Revos
Warn 4x Floods
ARB bumper
TeraFlex extended front bumpstops
Rock Lizard Skink Super Sliders
Bosch Size 86 battery
Jeepin by Al's 4.5 UC Arms
Kryptonite Differential Cover
JBA Bolt on KJ Tri-Angulated 4 Link