http://www.por15.com/PRODUCTS/PRIMERPAINTSCOATINGS/2PARTCOATINGS/HARDNOSEPAINTS/tabid/73/Default.aspx
I did mine and another guys. Once they cure, they cant be chipped.
(the key is not to scratch them before they cure..... like I did
)
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Line-X my rock rails? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=7161 |
Page 1 of 1 |
| Author: | riptricket [ Wed Mar 29, 2006 7:27 pm ] |
| Post subject: | Line-X my rock rails? |
I have some rust building on my rock rails... wondering if it is worth it to Line-X them? Does anyone know how much weight this will add to my KJ (influencing gas mileage)? Thanks! |
|
| Author: | bighause [ Wed Mar 29, 2006 7:37 pm ] |
| Post subject: | |
If they are rusting, lineXing them would probably be a bad idea since it would trap moisture in and wouldn't stop the rust from spreading. If you took the off and sanded them first, that would work pretty well. You would not even notice the weight difference (probably 20 lbs at the most) |
|
| Author: | JJsTJ [ Wed Mar 29, 2006 7:50 pm ] |
| Post subject: | |
Sand, prime, repaint. Repeat after every few trail rides. Line-X will only be tougher to touch up and will still scrape off on the rocks. |
|
| Author: | fireman1028 [ Wed Mar 29, 2006 8:41 pm ] |
| Post subject: | |
http://www.por15.com/PRODUCTS/PRIMERPAINTSCOATINGS/2PARTCOATINGS/HARDNOSEPAINTS/tabid/73/Default.aspx I did mine and another guys. Once they cure, they cant be chipped. (the key is not to scratch them before they cure..... like I did )
|
|
| Author: | EagleVT94 [ Wed Mar 29, 2006 8:46 pm ] |
| Post subject: | |
I had the same problem up here. I sanded down the rust and got them Line-X'd. If I could do it again I'd take the bars off so they can do a better job. I touch them up now with Bullet rust proof paint stuff. Weight? I think mud sticking to the side of you Jeep will weigh more! |
|
| Author: | Tokyojoe [ Wed Mar 29, 2006 10:22 pm ] |
| Post subject: | |
All I can say is Galvanize it. http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?t=6950 Cost is reasonable...never have to worry about rust ever again. |
|
| Author: | sqliberty [ Thu Mar 30, 2006 8:53 am ] |
| Post subject: | |
I did mine with line-x and they look really good, they can be touched up with that bedliner that comes in a spray can.Plus they look really cool. I did my brushguard with line-x too. |
|
| Author: | oldhockeyvb [ Sat Apr 01, 2006 1:04 pm ] |
| Post subject: | |
When mine get rusty I take them out on the AZ rocks and scrape off the rust, good as new again! |
|
| Author: | sqliberty [ Sat Apr 01, 2006 1:10 pm ] |
| Post subject: | |
oldhockeyvb wrote: When mine get rusty I take them out on the AZ rocks and scrape off the rust, good as new again!
That's an awesome reply |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|