LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Question about gearing....
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=74589		 Page 1 of 1
Author:  KJ_WHEELER_2010 [ Tue Mar 19, 2013 10:11 pm ]
Post subject:  Question about gearing....
Guess we are going to pull the trigger and regear to 4.10s. We just have to buy the gears because we can install them free in our shop. I know the upsides to reagearing....better mpg...helps the tranny.....etc. But what I was wondering is where has everyone gotten their gears at? I was looking at JeepinByAl, because I got my lift from him. I think I'll get the front diff gears from him. However on the rear, would these work..http://www.summitracing.com/parts/rmg-c ... /overview/ ? I just wanna make sure I get the right thing.
Author:  long_tall_texan [ Wed Mar 20, 2013 1:20 pm ]
Post subject:  Re: Question about gearing....
Yes. Those should work.

Sent from my MeanROM LTEvo with TapaTalk II
Author:  KJ_WHEELER_2010 [ Thu Mar 21, 2013 12:21 pm ]
Post subject:  Re: Question about gearing....
Thanks, I thought they would but wanted to make sure.
Author:  tommudd [ Thu Mar 21, 2013 1:58 pm ]
Post subject:  Re: Question about gearing....
haven't heard too many running Richmond but should work, good gears are getting harder to find, a lot are going cheap Chinese route :roll:
Author:  long_tall_texan [ Thu Mar 21, 2013 2:29 pm ]
Post subject:  Re: Question about gearing....
Make sure you get the 29 spline pinion, not the 27 spline one that some of the XJs used.

Edit: Sorry, that is axle, not pinion. Oops.
Author:  KJ_WHEELER_2010 [ Fri Mar 22, 2013 7:17 pm ]
Post subject:  Re: Question about gearing....
long_tall_texan wrote:
Make sure you get the 29 spline pinion, not the 27 spline one that some of the XJs used.

Edit: Sorry, that is axle, not pinion. Oops.


Thanks. Ok
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/