LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

blown engin options
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=76736		 Page 1 of 2
Author:  kingjeep [ Mon Sep 16, 2013 2:51 pm ]
Post subject:  blown engin options
so this morning i get in my 02 kj and turn the key i hear a rattling noise; and engine cut out as soon as i took my hand off the key it stalled out. had it towed to my buddy's shop he thinks it may have over heated and that the engine may be done. the jeep is smoking pity bad not sure its worth repair we looked up prices and used engines with 150 are over 2 grand rebuilt is even more any one have any ideas.

i am feeling very conflicted about what to do
Author:  Doolop [ Mon Sep 16, 2013 7:30 pm ]
Post subject:  Re: blown engin options
Take it from someone who has been there with an 02 as well. I rebuilt mine and ended up spending 1,800 to replace the Crank, connecting rods and pistons not to mention all the added little things that need to be on spec. If I had to do it over again I would just get a remaned one from [url]http://www.powertrainproducts.net/Dodge-3-7-Engine-Jeep-3-7-Engine-02-03-p/1307.htm[/url]. With the optional coverage your engine will out last the body.

If you do the rebuild take the block to a good machinist and make sure your cylinder wall are within factory spec and not ovaled. Make sure the valve seats are correct and seal. If you want any vendors that I dealt with (most were on-line) let me know and I will send you a list of what I needed to replace and what needs replaced.
Author:  kingjeep [ Mon Sep 16, 2013 8:07 pm ]
Post subject:  Re: blown engin options
thank you ill check it out timing sucks I am trying to start a food truck business so extra cash is something i do not have

this actually may be fee-sable i am thinking if i can take the jeep off the road till i get my business up and running i can do it now
Author:  JeepCoMj [ Tue Sep 17, 2013 9:14 am ]
Post subject:  Re: blown engin options
it's more likely that a head has failed than blowing the bottom end. a multitude of things can happen to cause that.

Either way, parts and labor, new plugs, I have done a complete head replacement both sides on one of these with new timing tensioners/runners/adjusters for $1600. only $1100 of that was parts.
Author:  kingjeep [ Tue Sep 17, 2013 9:43 am ]
Post subject:  Re: blown engin options
biggest problem is timing could not be wore my jeep is going to sit at my buddys shop for a while till i can get my food truck business started. i have a dodge durango i can drive in the mean time but that is having some sort of electriclal issue too and is at his shop as well we plan on getting that going by the end of the day if we can
Author:  kingjeep [ Tue Sep 17, 2013 11:01 pm ]
Post subject:  Re: blown engin options
has any one used this company www.powertrainproducts.net i would like some feed back
Author:  Doolop [ Wed Sep 18, 2013 9:59 am ]
Post subject:  Re: blown engin options
I learned about it from my father-in law he replaced his 4.0 in his WK 2 or 3 years ago. Engine runs great looked new when we installed it.

Sent from my DROID RAZR using Tapatalk 2
Author:  teckman02 [ Wed Sep 18, 2013 1:13 pm ]
Post subject:  Re: blown engin options
Doolop wrote:
I learned about it from my father-in law he replaced his 4.0 in his WK 2 or 3 years ago. Engine runs great looked new when we installed it.

Sent from my DROID RAZR using Tapatalk 2


The WK never had the 4.0 it did have the 4.7 tho
Author:  Doolop [ Wed Sep 18, 2013 2:27 pm ]
Post subject:  Re: blown engin options
teckman02 wrote:
Doolop wrote:
I learned about it from my father-in law he replaced his 4.0 in his WK 2 or 3 years ago. Engine runs great looked new when we installed it.

Sent from my DROID RAZR using Tapatalk 2


The WK never had the 4.0 it did have the 4.7 tho

Thanks for the correction. Working on 6 hours of sleep for 2 days.:shock:

Sent from my DROID RAZR using Tapatalk 2
Author:  kingjeep [ Tue Sep 24, 2013 10:17 pm ]
Post subject:  Re: blown engin options
any upgraded possibility here. has any one upgraded a Gasser to a crd or 4.7.

I helped some one put a 5.2 in a wj when they hydro locked the 4.7 but he never got his gauges working.
Author:  tommudd [ Tue Sep 24, 2013 10:34 pm ]
Post subject:  Re: blown engin options
Unless you have a few months and a very full checking account, just reinstall another 3.7.
Author:  TwoBobsKJ [ Wed Sep 25, 2013 3:50 pm ]
Post subject:  Re: blown engin options
tommudd wrote:
Unless you have a few months and a very full checking account, just reinstall another 3.7.


And you don't have to use the same model year engine to do a swap to another 3.7 if you're willing to break down the new engine to install timing wheels on the crank and the right cam sprocket.

I put in a 3.7 from an '07 Dakota with only 9700 miles. Engine cost me $1000 even, with timing rings, gaskets and various items needed it ran me just under $1500 total. Did all the work myself in my garage. Took me a week (in the winter while being on the road several of those days) so if you can devote a weekend to the job you can get it done pretty quickly.

Engine Swap Overview

Bob
Author:  Fouros [ Wed Oct 02, 2013 10:46 am ]
Post subject:  Re: blown engin options
I am in the same situation, any tips while the engine is being rebuilt to get a few more ponies out of it (its got 4.10s a cat back and snorkel already)
Author:  kingjeep [ Sat Oct 12, 2013 1:54 pm ]
Post subject:  Re: blown engin options
dont realy have the time or mony to do any thing with this rite now was wondering if any one want to buy it for a project make me an offer
Author:  kingjeep [ Wed Oct 16, 2013 6:17 pm ]
Post subject:  Re: blown engin options
some good news i was by my buddys shop yesterday and went to get somthing out of the jeep. i tryed to start it just to see what would happen and it started right up its still not running write but im going to pick it up tomarow and bring it home till i get my bussness going then we will probably pull the heads or may traid it in havent decided yet.

if any one wants a project ill consider any offers boddy and intror is good
Author:  kingjeep [ Tue Sep 09, 2014 6:07 pm ]
Post subject:  Re: blown engin options
ok so its been almost a year and its still siting i dont have the time to fix it and need to replace my other vehicle may just buy the engin and have it installed but my wife dosent like that idea she wants me to get somthing newer and more reliable i told her the only option is a wrangler or fix the my jeep.

so should i bite the bulit and trade my baby in 2 door 4 door would love a dect out rubcon but that is realy pricy opinions on other modles

there is a 2013 with only 10000 miles and lots of aftermarget goodies is a fredom adition dont konw anything about that
Author:  Bmxer524 [ Tue Sep 09, 2014 7:25 pm ]
Post subject:  Re: blown engin options
lfhoward just replaced his '08's 3.7 with one from Jasper. You could PM him, I forgot what he mentioned as far as cost wise.

As far as getting a JK, a 4door will be a pretty close replacement as far as room and size, especially if you have a family and need the rear seats. I also recommend getting the 3.6 if you do go the JK route. Pentastar powered JKs are '12+.

I don't know exactly what came with the Freedom edition, but I think it was more a graphic package thing than anything. So still basically a Sport with some extras.

My friend just bought a '14 JKU Sport a few months ago. He loves it, rides nice too.
Author:  kingjeep [ Sun Sep 14, 2014 6:55 pm ]
Post subject:  Re: blown engin options
ok so today i bit the bullet and traded in my 2002 kj and my 99 dodge durango for a 2015 jeep wrangler sport its not the rubocon i wanted and its not fixing my kj but its a start she will stay stock for a while but back in a jeep with the needs and expences of my only 1 year old food truck bussness and other expences my wife is piss about the payments but i needed somthign and she didnt want me to spend the mony to fix my jeep or dodge
Author:  Bmxer524 [ Sun Sep 14, 2014 11:15 pm ]
Post subject:  Re: blown engin options
Pics or it didn't happen :jester:
Author:  kingjeep [ Mon Sep 15, 2014 4:48 am ]
Post subject:  Re: blown engin options
ill post pics later after i pic it up
Page 1 of 2 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/