LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

OME Springs coil thickness
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=77430		 Page 1 of 1
Author:  LS12FAST4U [ Thu Nov 21, 2013 12:37 pm ]
Post subject:  OME Springs coil thickness
I need to know how thick the actual OME coil springs are for the CRD front and rear. If anyone can tell me that would be awesome.
Author:  Brianawd [ Thu Nov 21, 2013 1:44 pm ]
Post subject:  Re: OME Springs coil thickness
LS12FAST4U wrote:
I need to know how thick the actual OME coil springs are for the CRD front and rear. If anyone can tell me that would be awesome.


Front
17mm

Rear
16mm

http://www.sleeoffroad.com/installation ... _specs.pdf
Author:  LS12FAST4U [ Thu Nov 21, 2013 4:06 pm ]
Post subject:  Re: OME Springs coil thickness
Perfect. I'm thinking of having the OME springs stretched another half inch and then re tempered. Should get me around 3 inches of lift.
Author:  Brianawd [ Thu Nov 21, 2013 4:15 pm ]
Post subject:  Re: OME Springs coil thickness
LS12FAST4U wrote:
Perfect. I'm thinking of having the OME springs stretched another half inch and then re tempered. Should get me around 3 inches of lift.


Why not just use a top plate of clevis spacer. Your going to be at the limit of the shock as it will be close to its max extended length. It will ride like doo doo when the suspension drops as you will be over extending the shock.
Author:  tommudd [ Thu Nov 21, 2013 11:58 pm ]
Post subject:  Re: OME Springs coil thickness
LS12FAST4U wrote:
Perfect. I'm thinking of having the OME springs stretched another half inch and then re tempered. Should get me around 3 inches of lift.


Wouldn't do it, want a bad set of springs afterwards OK but sure wouldn't go that route. Plus the fact you just don't stretch springs out to give lift like that Height of the springs ahs nothing at all to how high it will lift a vehicle
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/