LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

KJ Gauge Panels
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=79283		 Page 1 of 1
Author:  weeks101 [ Fri Jun 06, 2014 11:26 am ]
Post subject:  KJ Gauge Panels
Hey everyone,

I am a CRD guy and I currently sell EGR delete kits for that motor. I am working on a new project that applies to all KJs and I wanted to let you guys know about it.

These gauge panels mount to the KJ dash pod vents and retain the use of HVAC and A-pillar grab handle. They fit all 2 1/16" gauges. If you are interested, I have posted all the details in the CRD forum here: viewtopic.php?f=5&t=79205

Thanks!
Seth



Photos:

Image

Image

Image


Mods: I have already reached out to Heather regarding becoming a vendor. Please delete if this thread if it breaks any rules.
Author:  LS12FAST4U [ Sat Jul 05, 2014 3:43 pm ]
Post subject:  Re: KJ Gauge Panels
Bump for a good product and good vendor
Author:  LibertyFever [ Sun Jul 06, 2014 9:30 pm ]
Post subject:  Re: KJ Gauge Panels
That's an interesting idea for adding a single gauge or two, or three.


Sent from my iPad using Tapatalk
Author:  WHITE the civilian [ Mon Jul 07, 2014 3:37 am ]
Post subject:  Re: KJ Gauge Panels
As a vendor are you going to be selling the insert itself without a gauge? Does the insert that the gauge fits into blow air directly into your eyeballs?
Author:  weeks101 [ Mon Jul 07, 2014 9:51 am ]
Post subject:  Re: KJ Gauge Panels
The panels do not come with gauges. No the air does not blow on your face.
Author:  thermorex [ Wed Jul 09, 2014 7:49 am ]
Post subject:  Re: KJ Gauge Panels
Just installed the gauges using weeks pods, very nice quality pods, super easy to install. Below are few pics for whoever is interested:

Image

Image

Image
Author:  weeks101 [ Wed Jul 09, 2014 9:42 pm ]
Post subject:  Re: KJ Gauge Panels
Looks great! Thanks for sharing the photos.
Author:  tjkj2002 [ Wed Jul 09, 2014 9:50 pm ]
Post subject:  Re: KJ Gauge Panels
My heater would melt any gauge placed in that spot,I've had to turn the AC on in the winter it get's so hot.They also are starting to melt my in-dash flip-out screen an my radio which is 3" away from them.I have to point them up and to the side or keep the screen closed.
Author:  weeks101 [ Wed Jul 09, 2014 9:58 pm ]
Post subject:  Re: KJ Gauge Panels
That seems very...odd.

Before i made these panels, myself and a friend with a KJ had GlowShift gauges installed in the center pods for almost 2 years with no issues whatsoever on either Jeep.
Author:  tjkj2002 [ Wed Jul 09, 2014 10:03 pm ]
Post subject:  Re: KJ Gauge Panels
weeks101 wrote:
That seems very...odd.

Before i made these panels, myself and a friend with a KJ had GlowShift gauges installed in the center pods for almost 2 years with no issues whatsoever on either Jeep.

Heaters will vary in output temp.Like I said my heater is so hot it started to melt my flip-out screen on my radio that sits 3" away from the center vents.The backs of all my vents are melted,measured the output temp once and it was over 165 degrees.
Author:  thermorex [ Fri Jul 18, 2014 9:43 am ]
Post subject:  Re: KJ Gauge Panels
tjkj2002 wrote:
weeks101 wrote:
That seems very...odd.

Before i made these panels, myself and a friend with a KJ had GlowShift gauges installed in the center pods for almost 2 years with no issues whatsoever on either Jeep.

Heaters will vary in output temp.Like I said my heater is so hot it started to melt my flip-out screen on my radio that sits 3" away from the center vents.The backs of all my vents are melted,measured the output temp once and it was over 165 degrees.


Wow, that's hot... I wish I had such a hot heater, I haven't been that lucky with any car I had...
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/