Is there an average price for regearing? I'd be more interested in the 4.56's personally, but we'll see
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Where did you regear? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=79346 |
Page 1 of 2 |
| Author: | lfhoward [ Fri Jun 13, 2014 4:14 pm ] |
| Post subject: | Where did you regear? |
Regearing comes up every few days in various posts, and 4.10's are on my eventual to-do list. But it's not a mod a shade tree mechanic or even most accomplished mechanics can do easily. Where did you get your regearing job done? I'd like to start a list of shops that have experience changing ring and pinion gears on Liberties, so when others want to do this mod in the future, they have some idea of where to go. A) KJ/KK: B) New Gear Ratio: C) Current Tire Size: D) Gear Shop (name, state, website, etc.): Comments: |
|
| Author: | tommudd [ Fri Jun 13, 2014 5:01 pm ] |
| Post subject: | Re: Where did you regear? |
A) KJ B) 4.10s want 4.56s C) 265-75-16s D) Bought a 4 cyl. diff with less than 5000 miles from a former member on here who went SFA rear new Motive gears etc Rear gears / etc installed by a member who is a Jeep Tech on his off day COMMENTS: One of the best things I have done to the KJ overall. Should of done it BACK while running 30 inch tires Was done about 80,000 miles ago |
|
| Author: | John3:17 [ Fri Jun 13, 2014 6:06 pm ] |
| Post subject: | Re: Where did you regear? |
A) KJ B) 4:10's Front & Rear from 4cyl donor C) 245/75/16 D) Front Diff & Rear axle installed at Mudd's Garage Comments: Tru- trac in the front Diff was installed at Daymude's garage Hagerstown, Md.. Really enjoy the pep it put back in my Jeep and my mpg returning to near normal. |
|
| Author: | nFodzy [ Fri Jun 13, 2014 7:26 pm ] |
| Post subject: | Re: Where did you regear? |
Is there an average price for regearing? I'd be more interested in the 4.56's personally, but we'll see
|
|
| Author: | lfhoward [ Fri Jun 13, 2014 7:37 pm ] |
| Post subject: | Re: Where did you regear? |
This is a good question. I've been quoted between $1500-$2000 per axle in the Philadelphia metro area. I would imagine it is less in the Midwest. |
|
| Author: | Gyro [ Fri Jun 13, 2014 8:03 pm ] |
| Post subject: | Re: Where did you regear? |
a)KJ b)4.10 dana front,usa alloy rear c)245/75/16 d)Rick Roods Transmission, Waterville Nova Scotia Canada http://www.rickroodstransmission.com/ comments: roughly $750cdn parts and $750cdn labour. |
|
| Author: | tjkj2002 [ Fri Jun 13, 2014 8:24 pm ] |
| Post subject: | Re: Where did you regear? |
1st go around................... A-KJ B-4.10's C-at the time was 265/75R16's D-Me,myself and I--Bought brand new front diff with 4.10's and installed a DTT,used Yukon gears for the rear and added a ARB. 2nd go around.................. A-KJ B-5.13's C-35x12.50x15 and 315/75R16's D-Front HP44 was done at Crawlertech--http://www.crawlertech4x4.com/--I supplied all the parts(ARB and Precision gears,precision master install kit) and they also welded some of the new brackets on also for $285.The rear was done by Currie--http://www.currieenterprises.com/--since the rear diff was built there ready to bolt on with ARB and Motive 5.14 gear set,setup was $400 for gears and welding all brackets. |
|
| Author: | nFodzy [ Fri Jun 13, 2014 11:42 pm ] |
| Post subject: | Re: Where did you regear? |
Gyro wrote: a)KJ b)4.10 dana front,usa alloy rear c)245/75/16 d)Rick Roods Transmission, Waterville Nova Scotia Canada http://www.rickroodstransmission.com/ comments: roughly $750cdn parts and $750cdn labour. For both front & rear? Seems pretty cheap. |
|
| Author: | fortx4 KJ [ Sat Jun 14, 2014 3:18 am ] |
| Post subject: | Re: Where did you regear? |
A) KJ B) 4:10's Front & Rear new Yukon and Dana master kits truetrac up front C) 265/75/16 D) local shop oahu $2200 parts and labor |
|
| Author: | HedsIc [ Sat Jun 14, 2014 4:24 pm ] |
| Post subject: | Re: Where did you regear? |
The best quote I've found in Iowa was $1800. That involved me bringing all the parts needed. So if I ordered everything from JBA I'd be looking at about $2500 for front and rear. I've been looking hard for a near by 4 banger though. Sent from my iPhone using Tapatalk |
|
| Author: | WHITE the civilian [ Thu Jun 19, 2014 8:10 am ] |
| Post subject: | Re: Where did you regear? |
I'm being quoted $450-$500 locally per axel at a taxi cab repair shop, parts not included. Going to 4.10's when my black rock 17" wheels find their way home with 245/75R17's (31.7" versus the 255/70R17's at an "even" 31") Duratracs before summers out!  Labor is cheaper than most here in Anchorage AK but the cost to ship things here is outrageous. $400-$800 to ship 5 tires and nearly that much for wheels as well. 
|
|
| Author: | fortx4 KJ [ Fri Jun 20, 2014 6:46 am ] |
| Post subject: | Re: Where did you regear? |
WHITE the civilian wrote: I'm being quoted $450-$500 locally per axel at a taxi cab repair shop, parts not included. Going to 4.10's when my black rock 17" wheels find their way home with 245/75R17's (31.7" versus the 255/70R17's at an "even" 31") Duratracs before summers out! Labor is cheaper than most here in Anchorage AK but the cost to ship things here is outrageous. $400-$800 to ship 5 tires and nearly that much for wheels as well. Got most of my parts on amazon prime  98% of the time, all the time lol
|
|
| Author: | WHITE the civilian [ Mon Jun 23, 2014 12:25 pm ] |
| Post subject: | Re: Where did you regear? |
fortx4 KJ wrote: WHITE the civilian wrote: I'm being quoted $450-$500 locally per axel at a taxi cab repair shop, parts not included. Going to 4.10's when my black rock 17" wheels find their way home with 245/75R17's (31.7" versus the 255/70R17's at an "even" 31") Duratracs before summers out! Labor is cheaper than most here in Anchorage AK but the cost to ship things here is outrageous. $400-$800 to ship 5 tires and nearly that much for wheels as well. Got most of my parts on amazon prime 98% of the time, all the time lolDid you get your sex panther with commemorative box set too? Haha (Amazon Prime - good idea ! ) |
|
| Author: | Cobalt-60 [ Tue Jun 24, 2014 9:56 am ] |
| Post subject: | Re: Where did you regear? |
A) KJ B) 4.10 C) 245/75R16 D) Sixditch Motorsport, Lilburn, GA Comments: Front custom steel LP Dana 30 w/ Detroit Trutrac and Spicer 4.10 Ring & Pinion. Rear Corporate 8.25" w/ Detroit Locker and Nitro 4.10 Ring & Pinion. Initial build was for cost of parts (Jeep was supposed to be the demo vehicle for a tubular bumper project that never took off.) Rebuild of front (after blown OEM aluminum front IFS) with steel Dana 30 $1500 all in (parts, labor, gears, install kit, etc.) since the TruTrac was the only thing salvageable. |
|
| Author: | Chipppy [ Mon Jun 30, 2014 6:04 pm ] |
| Post subject: | Re: Where did you regear? |
-02 kj -3.73 now 4.10 very soon -265/75/16 - found some donor 4.10 axles from a 4cyl. 700 clams Sent from my iPhone using Tapatalk |
|
| Author: | Kamaka.edlao [ Thu Mar 31, 2016 8:27 pm ] |
| Post subject: | Re: Where did you regear? |
Just lifted recently and went with 31's thinking I can live it. ERRR, wrong!  Need the power back. LolIs it possible you guys can put up some part numbers? I have a kk and having a hard time find the ring and pinions I need. I'm going with the truetrac but tell what you guys think I should do. |
|
| Author: | G.O.A.T. [ Thu Mar 31, 2016 11:27 pm ] |
| Post subject: | Re: Where did you regear? |
Kamaka.edlao wrote: Just lifted recently and went with 31's thinking I can live it. ERRR, wrong! Need the power back. LolIs it possible you guys can put up some part numbers? I have a kk and having a hard time find the ring and pinions I need. I'm going with the truetrac but tell what you guys think I should do. Yukon Front JK d30 gears 8.25 gears Plus master install kit Sent from my SM-N900P using Tapatalk |
|
| Author: | u2slow [ Fri Apr 01, 2016 1:48 pm ] |
| Post subject: | Re: Where did you regear? |
3.54 manual (6spd) and not re-geared. Running 245/75R16. 1st gear became usable again. Me & the missus don't have any trouble picking a gear for the speed/power required. 3000rpm in 6th makes for brisk highway travel  For used gears, the stock 4.10s can be very difficult to find. I was quoted $350 (front only) for the only set within 500km of me. 4.10 in 8.25" are virtually non-existent. 3.73 (both complete axles) I can find privately for <$200 anytime. |
|
| Author: | Kamaka.edlao [ Wed Apr 06, 2016 8:29 pm ] |
| Post subject: | Re: Where did you regear? |
G.O.A.T. wrote: Kamaka.edlao wrote: Just lifted recently and went with 31's thinking I can live it. ERRR, wrong! Need the power back. LolIs it possible you guys can put up some part numbers? I have a kk and having a hard time find the ring and pinions I need. I'm going with the truetrac but tell what you guys think I should do. Yukon Front JK d30 gears 8.25 gears Plus master install kit Sent from my SM-N900P using Tapatalk Hey man, I appreciate the advice. But to be sure before I spend the money. Is those parts a guarantee fit? Not trying to question your knowledge. |
|
| Author: | G.O.A.T. [ Wed Apr 06, 2016 9:17 pm ] |
| Post subject: | Re: Where did you regear? |
Kamaka.edlao wrote: G.O.A.T. wrote: Kamaka.edlao wrote: Just lifted recently and went with 31's thinking I can live it. ERRR, wrong! Need the power back. LolIs it possible you guys can put up some part numbers? I have a kk and having a hard time find the ring and pinions I need. I'm going with the truetrac but tell what you guys think I should do. Yukon Front JK d30 gears 8.25 gears Plus master install kit Sent from my SM-N900P using Tapatalk Hey man, I appreciate the advice. But to be sure before I spend the money. Is those parts a guarantee fit? Not trying to question your knowledge. I AM THE G.O.A.T. so yes. They will fit if you get the right gears. Gotta ask for the JK D30 not the Rubicon. Thats what we put in my buddies KK. Perfect fit. Sent from my SM-N900P using Tapatalk |
|
| Page 1 of 2 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|