You want to see white KJs lifted ?
How about Buggins ( local member) with 3 inch and 245-70-16s
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| another lift question http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=79907 |
Page 1 of 1 |
| Author: | Dieseljunkie88 [ Sun Aug 17, 2014 9:41 pm ] |
| Post subject: | another lift question |
Hi everyone, Ok so I know the lift questions are beat to death, i have the money saved up to get it and the wife is all for it. I am deciding between the Frankenlift and the tommudd econo lift, i have heard good things about both, although not nearly as much about the tommudd lift. My question is can i change the springs or paint them in the tommudd lift, or just get the franky and buy the uca's from jba, but that route will cost more and not as much lift but the wife and I both want everything to match. Also the fact that i dont have to assemble the front struts is a nice bonus. So what would yall do? |
|
| Author: | tommudd [ Sun Aug 17, 2014 10:21 pm ] |
| Post subject: | Re: another lift question |
What springs do you think you want? Of course you can paint the springs any color you want. Not hard to take the springs somewhere to have them compressed |
|
| Author: | Dieseljunkie88 [ Sun Aug 17, 2014 10:28 pm ] |
| Post subject: | Re: another lift question |
Thanks tom for responding. The springs aren't that big of a concern for me as I know both the ome and Iron man springs are great. I was just not sure if the paint would hold up long term. And how much is it usually to have the springs done as I don't really have any contacts in that area. Also why is it that all the info I find on the econo lift is mostly for the Kk does that info apply to ours also? |
|
| Author: | tommudd [ Sun Aug 17, 2014 10:32 pm ] |
| Post subject: | Re: another lift question |
Dieseljunkie88 wrote: Thanks tom for responding. The springs aren't that big of a concern for me as I know both the ome and Iron man springs are great. I was just not sure if the paint would hold up long term. And how much is it usually to have the springs done as I don't really have any contacts in that area. Also why is it that all the info I find on the econo lift is mostly for the Kk does that info apply to ours also? Should be able to find a shop that will compress the springs for 25/30 bucks per side or maybe less The front spring/shock setup is the same for the KJs and KKs Only difference between KJs and KKs is basically the UCAs and rear springs |
|
| Author: | Dieseljunkie88 [ Sun Aug 17, 2014 10:41 pm ] |
| Post subject: | Re: another lift question |
Ok well thank you for your help I will be ordering Friday!! Can't wait now it would be nice to see some other white kj's lol very elusive |
|
| Author: | tommudd [ Sun Aug 17, 2014 11:41 pm ] |
| Post subject: | Re: another lift question |
You want to see white KJs lifted ? How about Buggins ( local member) with 3 inch and 245-70-16s
|
|
| Author: | Dieseljunkie88 [ Sun Aug 17, 2014 11:49 pm ] |
| Post subject: | Re: another lift question |
Thats awesome! I don't really see any white ones lifted, it's nice to know what mine might look like when it's done. Thank you tom you have givin me more inspiration than you think thank you. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|