Looking for a second hand bull bar and wondered if any other models will fit?

You talking about those "bull bars" that are made from coke cans and bend when you hit a dragonfly? Or a ARB?

_________________
2002 KJ Limited 3.7, 5.25" lift via coilovers, custom HD rear springs, 32.2" tires on moabs (soon 33s) 4.56/JBA diff, OX lockers front/rear, NP241OR, Parker Fab front/rear bumpers, rock rails and roof rack, Viair OBA.

2006 KJ sport 3.7, 4" Ironman lift, 32" tires, Parker Fab front/rear bumpers and rock rails.

I'll settle for either atm. But yeah an arb would nice. I googled it and used the search function and couldn't find any info. Would a bar off a jk or tj or something similar fit?

Not without quite a bit of work. Some people I think have modded TJ bumpers to fit a KJ.

_________________
05 KJ Limited 4x4 in Light Khaki: Detours USA Backbone, Warn M8000, Huskyliners, RockLizard Super Skink sliders, OME/Bilstein Lift, JBA UCA's, 245/70/17 Nitto Terra Grapplers
07 LR3 SE V8
1996 XJ Country
2015 KL Limited

Ugly looking with TJ bumpers though

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

Why use a TJ bumper when there are Stubby and full width bumpers available for the KJ/KK

_________________
2002 KJ Limited 3.7, 5.25" lift via coilovers, custom HD rear springs, 32.2" tires on moabs (soon 33s) 4.56/JBA diff, OX lockers front/rear, NP241OR, Parker Fab front/rear bumpers, rock rails and roof rack, Viair OBA.

2006 KJ sport 3.7, 4" Ironman lift, 32" tires, Parker Fab front/rear bumpers and rock rails.

Pre runner would look pretty sexy.

There's just that nostalgia of the ifs guts hanging out and the pre runner letting it all hang out that totally romps. Mmmmmmmmm

_________________
2004 KJ 3.7 Limited:
IRO WJ Upper Arm -- WJ Rear LCA's -- Rear Driveshaft Spacer -- JBA Upper A Arms -- 4 inch Lift -- 265/75/16 4" B/S -- WasherBottle Relocate -- Custom High Mount Intake -- Carpet Delete -- Homebrew Winch Bumper -- Warn VR8000 -- Homemade Plow -- Pinch Weld POUNDED -- POR 15 inner fenders --

nostalgia......IFS guts hanging out ...........
Never, .... ever,....... do I include those two things in one thought or sentence

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

It's cuz I'm in love.

An aftermarket bumper lets that lady show off some of 'er sexy waistline

Err... IFS componants.

_________________
2004 KJ 3.7 Limited:
IRO WJ Upper Arm -- WJ Rear LCA's -- Rear Driveshaft Spacer -- JBA Upper A Arms -- 4 inch Lift -- 265/75/16 4" B/S -- WasherBottle Relocate -- Custom High Mount Intake -- Carpet Delete -- Homebrew Winch Bumper -- Warn VR8000 -- Homemade Plow -- Pinch Weld POUNDED -- POR 15 inner fenders --

Well I don't know about in Austrailia but ARB USA still has bumpers listed.

http://store.arbusa.com/ARB-Deluxe-Bar- ... P3328.aspx

_________________
2003/3.7 SOLD

2007 Wrangler - traded

2010 Wrangler Rubicon

Ran mine that way for a while, showed quite a bit.
still have that setup down in the basement , waiting for the day I finish changing it into my way

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

Sitting out there in the back of someone's mind is the brainstorm for the perfect be-all-end-all of kj bumpers. Both lightweight and strong, air bag and deer compatible, perhaps maybe a composite bumper? Who knows.

I saw a thread a little while ago where somebody compound linked all the kj bumper builds into one post. Maybe Tom can dig that up for us? I saw some really sexy stuff in it.

_________________
2004 KJ 3.7 Limited:
IRO WJ Upper Arm -- WJ Rear LCA's -- Rear Driveshaft Spacer -- JBA Upper A Arms -- 4 inch Lift -- 265/75/16 4" B/S -- WasherBottle Relocate -- Custom High Mount Intake -- Carpet Delete -- Homebrew Winch Bumper -- Warn VR8000 -- Homemade Plow -- Pinch Weld POUNDED -- POR 15 inner fenders --

Yes she does look sexy doesn't she ? And this was before I muddified that Matrix Brush Guard

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited