LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

N46 recall
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=80157		 Page 1 of 1
Author:  andrew.wenmoth [ Tue Sep 09, 2014 12:24 am ]
Post subject:  N46 recall
Time for the jeep to head to the shop for the hitch recall/fix/install whatever you want to call it. Havent seen to much on here about it so feel free to ask me any questions once its done and ill answer the best i can (from my experience at least)


Sent from my iPhone using Tapatalk
Author:  Brother [ Mon Sep 15, 2014 11:38 am ]
Post subject:  Re: N46 recall
Last year they sent me one too, I sent them the receipt for my Drawtite 2" receiver, I got a phone call back saying that doesn't meet the specs. Please post a pick of that hitch they put on yours... Thanks Ken
Author:  JeepMorrison [ Mon Sep 15, 2014 1:12 pm ]
Post subject:  Re: N46 recall
Its a factory mopar hitch.....I will take pic of my recall hitch tonight

Sent with the power of children's screams!!!
Author:  JeepMorrison [ Mon Sep 15, 2014 1:13 pm ]
Post subject:  Re: N46 recall
No big deal.....took hour or so. They said they do inspect the frame for any rust issues

Sent with the power of children's screams!!!
Author:  Emoto [ Mon Jan 12, 2015 3:07 pm ]
Post subject:  Re: N46 recall
Am going to have them install the recall hitch in the next few weeks and am considering asking them to also install the Mopar wiring harness at the same time. Can anyone ballpark how much that part and labor might cost me? I would like to get a small utility trailer to haul random stuff like a snaow blower or motorcycle and it would be nice to have the lights work. Thanks in advance!
Author:  PALiftedKK [ Wed Jan 14, 2015 4:44 pm ]
Post subject:  Re: N46 recall
Emoto wrote:
Am going to have them install the recall hitch in the next few weeks and am considering asking them to also install the Mopar wiring harness at the same time. Can anyone ballpark how much that part and labor might cost me? I would like to get a small utility trailer to haul random stuff like a snaow blower or motorcycle and it would be nice to have the lights work. Thanks in advance!


it would be a lot cheaper for you to do it your self. parts: $30. that's with out the trailer brake controller. if you go to FCA, they'll charge you in the ball park of $250. the best part about this particular install is that my grandmother could do it with out the instructions!!!
Author:  Emoto [ Wed Jan 14, 2015 4:47 pm ]
Post subject:  Re: N46 recall
Interesting. Thanks much!
Author:  Malkie [ Fri Apr 10, 2015 5:59 pm ]
Post subject:  Re: N46 recall
They couldn't do the recall on mine. Said it was "level 5 corrosion" and they couldn't get the bolts to thread in properly. I asked them to just tap new holes in the frame and they refused. So I asked if I could take the hitch with me....didn't go over so well.
Author:  WhitbyKJ [ Fri Apr 10, 2015 7:57 pm ]
Post subject:  Re: N46 recall
I've got some nasty rust on my frame.. If they refuse my recall, I'll ask for a new vehicle. It sounds far fetched right? But other vehicles with rust on the back don't catch fire when hit. Maybe I am being over zealous ? But I bought my Libby pre recall. And the rust was there... Pre recall. Every other vehicle on the road here in Ontario.. Has rust. Do they catch fire? No.
Author:  sooty [ Fri Jun 05, 2015 4:48 am ]
Post subject:  Re: N46 recall
Hi All

This is the solution they have come up with for Australia.

Image

Just wondering how they expect us to tow with it??
Author:  twowings [ Sat Jun 06, 2015 8:05 pm ]
Post subject:  Re: N46 recall
sooty wrote:
Hi All

This is the solution they have come up with for Australia.

Image

Just wondering how they expect us to tow with it??


Hook your toes onto the bar and hold the trailer tongue VERY tightly! :mrgreen:
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/