Anyone point me to the location of the PCV on my liberty KJ? One more thing, I took out the MAP to replace it after cleaning it 100 miles ago (keeps going to limp mode) and it's oiled up again quite badly. I'm thinking the PCV may be stuck or may need changing. Any other possibilities causing this - as I don't want to put in the new MAP only to oil it up again. Thanks in advance

Found the valve and it looks nothing like the valve shown in a parts list. I'll give it a clean and see what happens.

Would you mind sharing what year you have?

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

It's on the side of your oil fill housing

_________________
2005 Jeep Liberty Sport 3.7L 4spd Auto 4WD Lt Kahki
235/70/16 Goodyear Wrangler Trailmark Tires
96000 miles. Stock. Hopefully that will change!

2011 HHR 1LT 2.2L Auto Loaded

Former MOPAR Level IV Certified Parts/Service Advisor

Depends on year

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited