Fabricate
then sell me some.
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| OEM Cross Bar Adapters? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=81784 |
Page 1 of 1 |
| Author: | APC9199 [ Wed Apr 08, 2015 12:05 am ] |
| Post subject: | OEM Cross Bar Adapters? |
I just bought a 2006 liberty CRD with OEM cross bars on the roof rack. I like the look and lower profile of the OEM bars but my bike racks are all Thule. Does anyone know of an adapter to attach Thule components to OEM bars? I can probably fabricate something if I need to, but I prefer to spend a couple of bucks to get something tried and true. Thanks! |
|
| Author: | WhitbyKJ [ Wed Apr 08, 2015 7:32 am ] |
| Post subject: | Re: OEM Cross Bar Adapters? |
Fabricate then sell me some.
|
|
| Author: | APC9199 [ Wed Apr 08, 2015 12:09 pm ] |
| Post subject: | Re: OEM Cross Bar Adapters? |
WhitbyKJ wrote: Fabricate then sell me some.If I get enough interest, I just might. I manage a CNC/Fabrication shop that also does powdercoating, so I might present it as a side project to make some Ebay cash... Any interest in having some made from anyone here? 
|
|
| Author: | WhitbyKJ [ Wed Apr 08, 2015 3:27 pm ] |
| Post subject: | Re: OEM Cross Bar Adapters? |
A cnc fab shop you say? I think we need you in the loop over on the IRO upper arm topic! |
|
| Author: | jeeptorino68 [ Wed Apr 08, 2015 9:09 pm ] |
| Post subject: | Re: OEM Cross Bar Adapters? |
check out this writeup: http://www.jeepforum.com/forum/f28/how- ... ap-849907/ i have found the tees at this website, but it is 50$ for 4 of them with shipping. http://www.growerssupply.com/farm/suppl ... 05957.html |
|
| Author: | APC9199 [ Mon Jul 13, 2015 10:32 pm ] |
| Post subject: | Re: OEM Cross Bar Adapters? |
Wow! I lost this thread and just found it again! jeeptorino68 wrote: check out this writeup: http://www.jeepforum.com/forum/f28/how- ... ap-849907/ i have found the tees at this website, but it is 50$ for 4 of them with shipping. http://www.growerssupply.com/farm/suppl ... 05957.html That looks cool, but I have the OEM cross bars. Mine are the aero-style bars with a really low profile, which is awesome but they do not accept normal thule or yakima adapters. These require a sort of tee-bolt that slides down the center of a keyway in the cross bar. I can't seem to find anything OEM that will fit them. WhitbyKJ wrote: A cnc fab shop you say? I think we need you in the loop over on the IRO upper arm topic! I'll see if I can find the thread you're talking about. A PM probably wouldn't hurt. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|