i know some of you are awaiting the release of the IRO conversion bracket (no official name yet) and that others are growing impatient waiting for some of my ideas to materialize.

Allow me to explain where I have been.

At work!!! Lol workig crazy overtime!

When I came to lost keeps my work was going to be just for me, I had no idea other people may want some stuff that I make. Somehow, someway I ended up a vendor. Sure I have a ton of fab equipment, but those were just my toys. Here we are today, workin up funds to become official. Once I am official, the IRO bracket and custom coil over mounts will hit market. But till then, I need more mould!

And so, I have offered my services in the vendor department for all to enjoy!!

As always, lowest prices possible, confidentiality assured, and most of all a smile on your face:)

Custom parts for your kj are now available. I currently am set up for gasser requests.

Don't forget, if your not interested in me making something for you, I can still help you design it!

Sorry for being absent for so long

_________________
2004 KJ 3.7 Limited:
IRO WJ Upper Arm -- WJ Rear LCA's -- Rear Driveshaft Spacer -- JBA Upper A Arms -- 4 inch Lift -- 265/75/16 4" B/S -- WasherBottle Relocate -- Custom High Mount Intake -- Carpet Delete -- Homebrew Winch Bumper -- Warn VR8000 -- Homemade Plow -- Pinch Weld POUNDED -- POR 15 inner fenders --

Oh wow!

Somebody remind me to turn off auto correct!! Lol

_________________
2004 KJ 3.7 Limited:
IRO WJ Upper Arm -- WJ Rear LCA's -- Rear Driveshaft Spacer -- JBA Upper A Arms -- 4 inch Lift -- 265/75/16 4" B/S -- WasherBottle Relocate -- Custom High Mount Intake -- Carpet Delete -- Homebrew Winch Bumper -- Warn VR8000 -- Homemade Plow -- Pinch Weld POUNDED -- POR 15 inner fenders --

Before everyone and their Mother starts sending you all of this business
you may want to remind folks you are in Canada and shipping can be at times expensive and troublesome
Unless of course you have also created a craft that will fly over the borders and deliver on the good side of it without charge

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

This too my friend has been assessed and taken care of. Not a flying craft, that would be way cool. More practical of a solution awaits. And soon shall be revealed.

_________________
2004 KJ 3.7 Limited:
IRO WJ Upper Arm -- WJ Rear LCA's -- Rear Driveshaft Spacer -- JBA Upper A Arms -- 4 inch Lift -- 265/75/16 4" B/S -- WasherBottle Relocate -- Custom High Mount Intake -- Carpet Delete -- Homebrew Winch Bumper -- Warn VR8000 -- Homemade Plow -- Pinch Weld POUNDED -- POR 15 inner fenders --

Oh and HI!!!

Long time no see Tom. Sup dude?

_________________
2004 KJ 3.7 Limited:
IRO WJ Upper Arm -- WJ Rear LCA's -- Rear Driveshaft Spacer -- JBA Upper A Arms -- 4 inch Lift -- 265/75/16 4" B/S -- WasherBottle Relocate -- Custom High Mount Intake -- Carpet Delete -- Homebrew Winch Bumper -- Warn VR8000 -- Homemade Plow -- Pinch Weld POUNDED -- POR 15 inner fenders --

dude
[dood, dyood]
1. a man excessively concerned with his clothes, grooming, and manners. ( no not me )
2. a person reared in a large city. ( no raised way out in the country )
3. an urban Easterner who vacations on a ranch. ( again not me , own a farm, not a ranch and no vacations on it )

That word ( dude) always makes me laugh when someone uses it

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

Tom, aka "dude" hahahahaha

Dude:
Urban Dictionary

1) n. a name for anyone (stereotypically used by male surfters/skaters but now accepted by any race, sex, religion, and wealth) (Tom is someone)

2) n. something that's just so awesomly cool, amazingly kick booty (like Tom)

3) ?. a way to start a conversation (not apply here)

4) replacing "um" or "like" in any sentence (again, not apply here)

_________________
2002 KJ Limited 3.7, 5.25" lift via coilovers, custom HD rear springs, 32.2" tires on moabs (soon 33s) 4.56/JBA diff, OX lockers front/rear, NP241OR, Parker Fab front/rear bumpers, rock rails and roof rack, Viair OBA.

2006 KJ sport 3.7, 4" Ironman lift, 32" tires, Parker Fab front/rear bumpers and rock rails.

Rofl!

I wish you guys could meet me in person. Lol! My coworkers say that I'm a riot. Constantly bouncing from one topic to another is "entertaining" lol. "He's young" "youthful optimism"

When I say dude, it's a direct imposition that we are all young and hip we're never gonna get old and we'll be rock stars forever

Yah baby!

But the surfer part is true, I fancy kite surfing, wake boarding, jet ski's and the like. In the winter time, the tow rope gets hooked up to the KJ and the snow toys come out the fun never ends!!!

Oh!! New product idea!! For you boat owners that have the Trickster wake board rails, I can make a set for the KJ that mount right into the hitch receiver!! Who wants to do winter barrel rolls on a snow board down the trails??

_________________
2004 KJ 3.7 Limited:
IRO WJ Upper Arm -- WJ Rear LCA's -- Rear Driveshaft Spacer -- JBA Upper A Arms -- 4 inch Lift -- 265/75/16 4" B/S -- WasherBottle Relocate -- Custom High Mount Intake -- Carpet Delete -- Homebrew Winch Bumper -- Warn VR8000 -- Homemade Plow -- Pinch Weld POUNDED -- POR 15 inner fenders --

Probably had something to do with you paying whatever fee Lost charges for a vendor banner.



https://www.youtube.com/watch?v=A5cneCgNA9U



Trust me, no apologies necessary, in fact, feel free to not post again until you actually have something to say.

_________________
JBA 4" lift, IRO Tri-link w/ wwdiesel bracket, JBA sliders, 235/85-16 Goodyear Wrangler Duratracs, Mercedes Benz forged ultralight wheels, Weeks stage 1 and 2, Weeks lift pump and harness, Weeks battery tray and AGM battery, GDE tune, Suncoast TC, updated front pump, HDS 001 T-stat, ARP studs, Front and rear Detroit/Eaton Truetrac LSD.

Probably had something to do with paying the fee or having all my tech articles removed. Your right. But then again I supported LOST financially. And will continue to do so.

I am curious however if your asking me to not post until I have something to say was rhetoric to some offence I have committed? Or if your just out line blocking? Did I offend you somehow?

_________________
2004 KJ 3.7 Limited:
IRO WJ Upper Arm -- WJ Rear LCA's -- Rear Driveshaft Spacer -- JBA Upper A Arms -- 4 inch Lift -- 265/75/16 4" B/S -- WasherBottle Relocate -- Custom High Mount Intake -- Carpet Delete -- Homebrew Winch Bumper -- Warn VR8000 -- Homemade Plow -- Pinch Weld POUNDED -- POR 15 inner fenders --

Further to that. Exactly what might prompt me the right to say something? Likewise what may be the appropriate thing to say?

Just askin.

_________________
2004 KJ 3.7 Limited:
IRO WJ Upper Arm -- WJ Rear LCA's -- Rear Driveshaft Spacer -- JBA Upper A Arms -- 4 inch Lift -- 265/75/16 4" B/S -- WasherBottle Relocate -- Custom High Mount Intake -- Carpet Delete -- Homebrew Winch Bumper -- Warn VR8000 -- Homemade Plow -- Pinch Weld POUNDED -- POR 15 inner fenders --

"Free shipping"

You better believe it!

If I could, I would. Already tackled the border issue.

_________________
2004 KJ 3.7 Limited:
IRO WJ Upper Arm -- WJ Rear LCA's -- Rear Driveshaft Spacer -- JBA Upper A Arms -- 4 inch Lift -- 265/75/16 4" B/S -- WasherBottle Relocate -- Custom High Mount Intake -- Carpet Delete -- Homebrew Winch Bumper -- Warn VR8000 -- Homemade Plow -- Pinch Weld POUNDED -- POR 15 inner fenders --

True test is after you actually have something to ship and see how your " system" is going to work

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

"Free Installation"

_________________
--Prof

927/948 OME Springs - Bilstein Shocks - JBA Upper Control Arms - Rage Black Widow Roof Basket - Viper 3606V Alarm System

What are you doing? Hiding the parts in shipments of illegal drugs?

_________________
2003/3.7 SOLD

2007 Wrangler - traded

2010 Wrangler Rubicon

Its actually real easy solution. Have someone in the states manufacture his products

_________________
2002 KJ Limited 3.7, 5.25" lift via coilovers, custom HD rear springs, 32.2" tires on moabs (soon 33s) 4.56/JBA diff, OX lockers front/rear, NP241OR, Parker Fab front/rear bumpers, rock rails and roof rack, Viair OBA.

2006 KJ sport 3.7, 4" Ironman lift, 32" tires, Parker Fab front/rear bumpers and rock rails.

But if he does that then some will bad talk him on Facebook about not building his own

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

Its still my designs. I still get a little bit of $$$ and so does LOST.

The key for me, is customer service. If you want it Made in America, it gets made in America. If you want it made in Canada, it gets made in Canada. Doesn't really matter to me. I've got one item waiting for release, just finishing some legal work. That's the IRO bracket.

Second item is entering its final phases of r and d, the DIY steel diff kit for the kj,
Kk is scheduled for the fall.

And this weekend, thanks to a custom order request from a LOST member, we're getting a new type of armour never seen before (I hope) that will be released. And you can drop your drawers over the price. One of the benefits of having tmr customs practically next door.

Sweet products are coming, I only ask for your patience.

_________________
2004 KJ 3.7 Limited:
IRO WJ Upper Arm -- WJ Rear LCA's -- Rear Driveshaft Spacer -- JBA Upper A Arms -- 4 inch Lift -- 265/75/16 4" B/S -- WasherBottle Relocate -- Custom High Mount Intake -- Carpet Delete -- Homebrew Winch Bumper -- Warn VR8000 -- Homemade Plow -- Pinch Weld POUNDED -- POR 15 inner fenders --

Isn't it true that you drop your drawers when you're about to get reamed?

_________________
--Prof

927/948 OME Springs - Bilstein Shocks - JBA Upper Control Arms - Rage Black Widow Roof Basket - Viper 3606V Alarm System