| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Trying to open up shop! http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=82201 |
Page 1 of 3 |
| Author: | WhitbyKJ [ Fri May 22, 2015 8:31 pm ] |
| Post subject: | Trying to open up shop! |
i know some of you are awaiting the release of the IRO conversion bracket (no official name yet) and that others are growing impatient waiting for some of my ideas to materialize. Allow me to explain where I have been. At work!!! Lol workig crazy overtime! When I came to lost keeps my work was going to be just for me, I had no idea other people may want some stuff that I make. Somehow, someway I ended up a vendor. Sure I have a ton of fab equipment, but those were just my toys. Here we are today, workin up funds to become official. Once I am official, the IRO bracket and custom coil over mounts will hit market. But till then, I need more mould! And so, I have offered my services in the vendor department for all to enjoy!! As always, lowest prices possible, confidentiality assured, and most of all a smile on your face:) Custom parts for your kj are now available. I currently am set up for gasser requests. Don't forget, if your not interested in me making something for you, I can still help you design it! Sorry for being absent for so long |
|
| Author: | WhitbyKJ [ Fri May 22, 2015 8:33 pm ] |
| Post subject: | Re: Trying to open up shop! |
Oh wow! Somebody remind me to turn off auto correct!! Lol |
|
| Author: | tommudd [ Fri May 22, 2015 9:37 pm ] |
| Post subject: | Re: Trying to open up shop! |
Before everyone and their Mother starts sending you all of this business you may want to remind folks you are in Canada and shipping can be at times expensive and troublesome Unless of course you have also created a craft that will fly over the borders and deliver on the good side of it without charge 
|
|
| Author: | WhitbyKJ [ Fri May 22, 2015 9:52 pm ] |
| Post subject: | Re: Trying to open up shop! |
This too my friend has been assessed and taken care of. Not a flying craft, that would be way cool. More practical of a solution awaits. And soon shall be revealed. |
|
| Author: | WhitbyKJ [ Fri May 22, 2015 9:55 pm ] |
| Post subject: | Re: Trying to open up shop! |
Oh and HI!!! Long time no see Tom. Sup dude? |
|
| Author: | tommudd [ Fri May 22, 2015 11:54 pm ] |
| Post subject: | Re: Trying to open up shop! |
dude [dood, dyood] 1. a man excessively concerned with his clothes, grooming, and manners. ( no not me ) 2. a person reared in a large city. ( no raised way out in the country ) 3. an urban Easterner who vacations on a ranch. ( again not me , own a farm, not a ranch and no vacations on it ) That word ( dude) always makes me laugh when someone uses it |
|
| Author: | JeepMorrison [ Sat May 23, 2015 12:18 am ] |
| Post subject: | Re: Trying to open up shop! |
Tom, aka "dude" hahahahaha Dude: Urban Dictionary 1) n. a name for anyone (stereotypically used by male surfters/skaters but now accepted by any race, sex, religion, and wealth) (Tom is someone) 2) n. something that's just so awesomly cool, amazingly kick booty (like Tom) 3) ?. a way to start a conversation (not apply here) 4) replacing "um" or "like" in any sentence (again, not apply here) |
|
| Author: | WhitbyKJ [ Sat May 23, 2015 5:59 am ] |
| Post subject: | Re: Trying to open up shop! |
Rofl! I wish you guys could meet me in person. Lol! My coworkers say that I'm a riot. Constantly bouncing from one topic to another is "entertaining" lol. "He's young" "youthful optimism" When I say dude, it's a direct imposition that we are all young and hip  we're never gonna get old and we'll be rock stars forever Yah baby! But the surfer part is true, I fancy kite surfing, wake boarding, jet ski's and the like. In the winter time, the tow rope gets hooked up to the KJ and the snow toys come out the fun never ends!!!Oh!! New product idea!! For you boat owners that have the Trickster wake board rails, I can make a set for the KJ that mount right into the hitch receiver!! Who wants to do winter barrel rolls on a snow board down the trails?? |
|
| Author: | Dent [ Sat May 23, 2015 9:58 am ] |
| Post subject: | Re: Trying to open up shop! |
WhitbyKJ wrote: Somehow, someway I ended up a vendor. Probably had something to do with you paying whatever fee Lost charges for a vendor banner. WhitbyKJ wrote: Sure I have a ton of fab equipment, but those were just my toys. https://www.youtube.com/watch?v=A5cneCgNA9U WhitbyKJ wrote: Sorry for being absent for so long Trust me, no apologies necessary, in fact, feel free to not post again until you actually have something to say. |
|
| Author: | WhitbyKJ [ Sat May 23, 2015 11:36 am ] |
| Post subject: | Re: Trying to open up shop! |
Dent wrote: WhitbyKJ wrote: Somehow, someway I ended up a vendor. Probably had something to do with you paying whatever fee Lost charges for a vendor banner. WhitbyKJ wrote: Sure I have a ton of fab equipment, but those were just my toys. https://www.youtube.com/watch?v=A5cneCgNA9U WhitbyKJ wrote: Sorry for being absent for so long Trust me, no apologies necessary, in fact, feel free to not post again until you actually have something to say. Probably had something to do with paying the fee or having all my tech articles removed. Your right. But then again I supported LOST financially. And will continue to do so. I am curious however if your asking me to not post until I have something to say was rhetoric to some offence I have committed? Or if your just out line blocking? Did I offend you somehow? |
|
| Author: | WhitbyKJ [ Sat May 23, 2015 11:38 am ] |
| Post subject: | Re: Trying to open up shop! |
Further to that. Exactly what might prompt me the right to say something? Likewise what may be the appropriate thing to say? Just askin. |
|
| Author: | twowings [ Mon May 25, 2015 7:52 pm ] |
| Post subject: | Re: Trying to open up shop! |
"Free shipping" |
|
| Author: | WhitbyKJ [ Tue May 26, 2015 9:22 pm ] |
| Post subject: | Re: Trying to open up shop! |
You better believe it! If I could, I would. Already tackled the border issue. |
|
| Author: | tommudd [ Tue May 26, 2015 10:27 pm ] |
| Post subject: | Re: Trying to open up shop! |
True test is after you actually have something to ship and see how your " system" is going to work |
|
| Author: | profdlp [ Tue May 26, 2015 10:30 pm ] |
| Post subject: | Re: Trying to open up shop! |
"Free Installation" |
|
| Author: | John3:17 [ Wed May 27, 2015 12:00 am ] |
| Post subject: | Re: Trying to open up shop! |
WhitbyKJ wrote: You better believe it! If I could, I would. Already tackled the border issue. What are you doing? Hiding the parts in shipments of illegal drugs?  
|
|
| Author: | JeepMorrison [ Wed May 27, 2015 1:11 am ] |
| Post subject: | Re: Trying to open up shop! |
Its actually real easy solution. Have someone in the states manufacture his products |
|
| Author: | tommudd [ Wed May 27, 2015 6:19 am ] |
| Post subject: | Re: Trying to open up shop! |
But if he does that then some will bad talk him on Facebook about not building his own
|
|
| Author: | WhitbyKJ [ Wed May 27, 2015 10:33 pm ] |
| Post subject: | Re: Trying to open up shop! |
Its still my designs. I still get a little bit of $$$ and so does LOST. The key for me, is customer service. If you want it Made in America, it gets made in America. If you want it made in Canada, it gets made in Canada. Doesn't really matter to me. I've got one item waiting for release, just finishing some legal work. That's the IRO bracket. Second item is entering its final phases of r and d, the DIY steel diff kit for the kj, Kk is scheduled for the fall. And this weekend, thanks to a custom order request from a LOST member, we're getting a new type of armour never seen before (I hope) that will be released. And you can drop your drawers over the price. One of the benefits of having tmr customs practically next door. Sweet products are coming, I only ask for your patience. |
|
| Author: | profdlp [ Wed May 27, 2015 11:06 pm ] |
| Post subject: | Re: Trying to open up shop! |
WhitbyKJ wrote: ...And you can drop your drawers over the price... Isn't it true that you drop your drawers when you're about to get reamed?
|
|
| Page 1 of 3 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|