Time for the jeep to head to the shop for the hitch recall/fix/install whatever you want to call it. Havent seen to much on here about it so feel free to ask me any questions once its done and ill answer the best i can (from my experience at least)


Sent from my iPhone using Tapatalk

_________________
06 KJ sport 926/948s Mopar/Boiler Skids, trimmed front bumper with detours backbone, (in possession of or soon: custom RL Super skink sliders (tommudd) and JBA upper Arms)

Last year they sent me one too, I sent them the receipt for my Drawtite 2" receiver, I got a phone call back saying that doesn't meet the specs. Please post a pick of that hitch they put on yours... Thanks Ken

Its a factory mopar hitch.....I will take pic of my recall hitch tonight

Sent with the power of children's screams!!!

_________________
2002 KJ Limited 3.7, 5.25" lift via coilovers, custom HD rear springs, 32.2" tires on moabs (soon 33s) 4.56/JBA diff, OX lockers front/rear, NP241OR, Parker Fab front/rear bumpers, rock rails and roof rack, Viair OBA.

2006 KJ sport 3.7, 4" Ironman lift, 32" tires, Parker Fab front/rear bumpers and rock rails.

No big deal.....took hour or so. They said they do inspect the frame for any rust issues

Sent with the power of children's screams!!!

_________________
2002 KJ Limited 3.7, 5.25" lift via coilovers, custom HD rear springs, 32.2" tires on moabs (soon 33s) 4.56/JBA diff, OX lockers front/rear, NP241OR, Parker Fab front/rear bumpers, rock rails and roof rack, Viair OBA.

2006 KJ sport 3.7, 4" Ironman lift, 32" tires, Parker Fab front/rear bumpers and rock rails.

Am going to have them install the recall hitch in the next few weeks and am considering asking them to also install the Mopar wiring harness at the same time. Can anyone ballpark how much that part and labor might cost me? I would like to get a small utility trailer to haul random stuff like a snaow blower or motorcycle and it would be nice to have the lights work. Thanks in advance!

it would be a lot cheaper for you to do it your self. parts: $30. that's with out the trailer brake controller. if you go to FCA, they'll charge you in the ball park of $250. the best part about this particular install is that my grandmother could do it with out the instructions!!!

_________________
2012 Jeep Liberty KK 109k miles and stong
4" lift.
Gen 5.5 A-Arms
Maxxis 31x10.50x15
ATS42rle

Interesting. Thanks much!

They couldn't do the recall on mine. Said it was "level 5 corrosion" and they couldn't get the bolts to thread in properly. I asked them to just tap new holes in the frame and they refused. So I asked if I could take the hitch with me....didn't go over so well.

I've got some nasty rust on my frame.. If they refuse my recall, I'll ask for a new vehicle. It sounds far fetched right? But other vehicles with rust on the back don't catch fire when hit. Maybe I am being over zealous ? But I bought my Libby pre recall. And the rust was there... Pre recall. Every other vehicle on the road here in Ontario.. Has rust. Do they catch fire? No.

_________________
2004 KJ 3.7 Limited:
IRO WJ Upper Arm -- WJ Rear LCA's -- Rear Driveshaft Spacer -- JBA Upper A Arms -- 4 inch Lift -- 265/75/16 4" B/S -- WasherBottle Relocate -- Custom High Mount Intake -- Carpet Delete -- Homebrew Winch Bumper -- Warn VR8000 -- Homemade Plow -- Pinch Weld POUNDED -- POR 15 inner fenders --

Hi All

This is the solution they have come up with for Australia.



Just wondering how they expect us to tow with it??

Hook your toes onto the bar and hold the trailer tongue VERY tightly!