Just wondering if there are any interchangeable parts from other jeeps? brakes, seats, bigger deisel motors etc. There was a thread on a chev (i think) torque converter but i can't find it again. And I'd love to go to twin (or more ) piston brake calipers.
Any similarities between the 3.0 v6 crd and the 2.8crd? Are they worlds apart or would the conversion be possible?

As far as i know Dodge nitro fold down front seats can go in KJs, dodge durango rear shocks can be used if you shim them and extend the brake line brackets down a bit, cant think of anything else off the top of my head

TJ moabs

Gyro

But they do take some mods to make them work in a KJ. And depending on what year you have to some how adapt for the airbag sensor and what not.



Sent from my SM-N900P using Tapatalk

_________________
2002 KJ Limited 3.7, 5.25" lift via coilovers, custom HD rear springs, 32.2" tires on moabs (soon 33s) 4.56/JBA diff, OX lockers front/rear, NP241OR, Parker Fab front/rear bumpers, rock rails and roof rack, Viair OBA.

2006 KJ sport 3.7, 4" Ironman lift, 32" tires, Parker Fab front/rear bumpers and rock rails.

Wj rear lca's

Kk knuckle and lca swap... Whoops.. Let that one out of the bag (still testing this)

_________________
2004 KJ 3.7 Limited:
IRO WJ Upper Arm -- WJ Rear LCA's -- Rear Driveshaft Spacer -- JBA Upper A Arms -- 4 inch Lift -- 265/75/16 4" B/S -- WasherBottle Relocate -- Custom High Mount Intake -- Carpet Delete -- Homebrew Winch Bumper -- Warn VR8000 -- Homemade Plow -- Pinch Weld POUNDED -- POR 15 inner fenders --

and the BS keeps rolling

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

Can Wj rear arms really go in the kj?

Bs eh?

There is a side by side pic of a kk and kj cradle, oh and there is the kk cradle installed on my kj. Guess what... If the KJ arms mounted to the kk cradle during my little experiment then it is safe to assume that kk arms with bolt to a kj cradle. Shall I continue and order a set of knuckles and post pics of them installed on my kj also?

Or can you take it at face value that I actually am testing a theory. .... Bs that.. And get off my back.

_________________
2004 KJ 3.7 Limited:
IRO WJ Upper Arm -- WJ Rear LCA's -- Rear Driveshaft Spacer -- JBA Upper A Arms -- 4 inch Lift -- 265/75/16 4" B/S -- WasherBottle Relocate -- Custom High Mount Intake -- Carpet Delete -- Homebrew Winch Bumper -- Warn VR8000 -- Homemade Plow -- Pinch Weld POUNDED -- POR 15 inner fenders --

Dodge dakota rear shocks
Kk clevis
4.7 throttle body from WJ
4.7 coil on plugs
LJ rear coil springs?? (Rumor)
Kk steering rack (I believe)
Kk engine (depending on year of kj)
The headlight bulbs are big one, I THINK it's a grand caravan that uses the same bulb?? Tons of those in the wreckers, always free bulbs.. They don't care about stuff like that.
Higher amp altwrnator option from rockauto
IRO upper rear arm for wj (If I ever release the bracket to the public lol)
I have heard of guys putting the rubicon tcase on a lib,
The list really is endless when you think about it.

I have pretty much hacked my entire libby up and tried everything under the sun, and fantasized about the rest.

_________________
2004 KJ 3.7 Limited:
IRO WJ Upper Arm -- WJ Rear LCA's -- Rear Driveshaft Spacer -- JBA Upper A Arms -- 4 inch Lift -- 265/75/16 4" B/S -- WasherBottle Relocate -- Custom High Mount Intake -- Carpet Delete -- Homebrew Winch Bumper -- Warn VR8000 -- Homemade Plow -- Pinch Weld POUNDED -- POR 15 inner fenders --

I met a member from here who did have a Rubi rocktrac transfer case in his diesel KJ...I saw it with my own eyes....

_________________
Black '05 Renegade. Front suspension: Frankenlift, Moog HD LBJ's, Audiboy cut CV's
Rear suspension: OME 948's, 2 extra upper ISO's, Rancho RS 5000 shocks.
31X10.50X15 Duratrac's/ProComp 152's
ARB bumper, Mopar skids, JCR stage III's, Reese hitch with tractor lights, Champion shackle insert, "homebrew" on board air, 1000 watt inverter

I have a Rubi Rocktrac in my KJ. See it with my own eyes everyday. Not really a easy swap, but with some work (and alot of $$) they fit.

Sent from my SM-N900P using Tapatalk

_________________
2002 KJ Limited 3.7, 5.25" lift via coilovers, custom HD rear springs, 32.2" tires on moabs (soon 33s) 4.56/JBA diff, OX lockers front/rear, NP241OR, Parker Fab front/rear bumpers, rock rails and roof rack, Viair OBA.

2006 KJ sport 3.7, 4" Ironman lift, 32" tires, Parker Fab front/rear bumpers and rock rails.

I think you should do a write up.

_________________
2004 KJ 3.7 Limited:
IRO WJ Upper Arm -- WJ Rear LCA's -- Rear Driveshaft Spacer -- JBA Upper A Arms -- 4 inch Lift -- 265/75/16 4" B/S -- WasherBottle Relocate -- Custom High Mount Intake -- Carpet Delete -- Homebrew Winch Bumper -- Warn VR8000 -- Homemade Plow -- Pinch Weld POUNDED -- POR 15 inner fenders --

^^^^^^^^X2

_________________
________
06 Renegade, 265-70-16 Duratracs on Moab's/OMF, RL sliders ,roof rack, On board air, JBA-UCA, adjust-a strut, Rear-OME 948 two uppers ,Sensatrac shocks, Boiler rad. skid, Mopar/4x guard skid,Terra-flex 4:1,HD cooling,more lights, gauges. ARB/Warn, Mudds Rear Bumper.