Heat/AC interior fan issue

Arkie · **Posted:** Wed Jul 22, 2015 7:54 pm

Blows great of #3 & #4 settings, goes completely off on 1 & 2. Most likely the switch, or relay?

Bob

PALiftedKK · **Posted:** Thu Jul 23, 2015 11:43 am

Blower resistor.

Lancer · **Posted:** Sat Jul 25, 2015 7:33 am

Yep. Takes about 10-15 minutes to change the resistor.

Arkie · **Posted:** Sat Jul 25, 2015 12:01 pm

Where's it located?

Bob

Sent from my iPad using Tapatalk

Lancer · **Posted:** Sat Jul 25, 2015 12:32 pm

Behind the glove box. You can pop the side of the box to let it open out completely, and the resistor is held in by a screw - can't recall the size. You unplug the connector - there's a latch, old resistor off, new one on. I found the hardest part was putting the screw back in - space is a little bit tight!

Leeann · **Joined:** Thu Mar 14, 2013 9:19 pm **Posts:** 523

Arkie · **Posted:** Sun Jul 26, 2015 11:16 am

Thanks, y'all for the help and excellent pictures!

Bob

Sent from my iPad using Tapatalk

bugnout · **Posted:** Sun Jul 26, 2015 12:10 pm

Do yourself a favor and order a blower resistor from a 2001-2004 Chrysler Sebring. Its made better than the part they put in the Liberty. Direct replacement, no modification required

Arkie · **Posted:** Sun Jul 26, 2015 5:19 pm

Aftermarket from O'Reilly, you think they'd actually be different?

Bob

ATXKJ · **Posted:** Sun Jul 26, 2015 6:30 pm

While you're in there - there's a grate where air recirculates -

tends to get covered in dust -vacuum it and you get better air flow.

bugnout · **Posted:** Sun Jul 26, 2015 10:13 pm

Arkie wrote:

Aftermarket from O'Reilly, you think they'd actually be different?

Dont know about aftermarket. I ordered from the dealer.

Arkie · **Posted:** Mon Jul 27, 2015 5:39 pm

O'Reilly lists different part #, but the one for the Lib (BWD) @ $24 has a lifetime warranty.

Bob

Heat/AC interior fan issue

Who is online